Inverter cables touched

Discussion in 'Prius v Care, Maintenance and Troubleshooting' started by 473 Prius v, Oct 11, 2025 at 12:30 PM.

  1. 473 Prius v

    473 Prius v Junior Member

    Joined:
    Oct 2, 2023
    8
    0
    0
    Location:
    Grenada
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    so I've made a big mistake and the reason my car wont go into ready mode is because the inverter wires touched while the 12v battery was still connected can anyone direct me on what fuse or relay I will have to change to fix this ? I've checked all in the engine compartment and they are good or any component that may be damaged
     
    #1 473 Prius v, Oct 11, 2025 at 12:30 PM
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    27,179
    17,830
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Specificity will be helpful here.

    Which wires touched? Did they touch each other, or something else, or both? (There are a bunch of wires to the "inverter".)

    How did they come to touch?

    How long did the touching last?

    What state or states (off, acc, ig on, ready) might the car have been in while the wires were in contact?
     
    #2 ChapmanF, Oct 11, 2025 at 4:04 PM
(You must log in or sign up to post here.)