Are modules tested 8.0v at 3.5ah good enough for a full pack replacement on an older car?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by GreenTea&SaltWater, Oct 11, 2025 at 12:48 PM.

Tags:
  1. GreenTea&SaltWater

    GreenTea&SaltWater Member

    Joined:
    Dec 9, 2019
    199
    58
    0
    Location:
    Los angeles
    Vehicle:
    2010 Prius
    Model:
    One
    Need to do a rebuild on a 2010 Camry. The seller warns that these will not work for a full battery rebuild but I don't need it to work at full capacity, just good enough.
     

    Attached Files:

    #1 GreenTea&SaltWater, Oct 11, 2025 at 12:48 PM
  2. BiomedO1

    BiomedO1 Senior Member

    Joined:
    Mar 27, 2021
    3,211
    1,702
    0
    Location:
    SacTown, Ca
    Vehicle:
    2021 Prius Prime
    Model:
    LE
    IMHO; Salesmen can say anything on fleabay - You need to test and verify!!!. I can get an 8-VDC reading, surface charge right after disconnecting the charger. It needs to be run through a battery tester and see how it handles a current load. Current load test will reveal how it's going to help or hinder your traction pack operations.
     
    #2 BiomedO1, Oct 11, 2025 at 2:08 PM
(You must log in or sign up to post here.)