TPM Programing Questions?

Seems I read somewhere that is you remove all 4 sensors from the system, you won't
get the light. Since there are no sensors to report.

Not sure if this is true or not though.

 

Not true.

You would either have to disable the circuit too the light electrically with a jumper or block it off on the screen with a piece of tape.

 

This is indeed not true.

(What can be tested/done to fool the system (apart from the circuit disablement) is to put four activated cheap TPMs sensors in a pressure can (that can hold pressure and have a big enough opening to put them sensors in there ) in the trunk and fool the ECU these readings are from the tires…)

NOTICE: Toyota or priumium do not recommend or condone this foolish fooling of an ECU.

 

Why go through this complicated exercise and get no benefit form the TPMS transmitters?

Just put the transmitters into the wheels with the tires and get their ful benefit.

As I posted, a piece of wire or black tape gets the same results.