07 here for actuator . I have a loaded 07 here that drives no codes brakes are perfect etc . If I move this actuator to the 07 I'm working on . Bleed manually no sir at bleeders anywer. Then plug up any of the scanners to bleed brakes . The bleed fails at first screen for bleed actuator removed. The car is stopped ign on acc or ready no matter. Park brake set. Autel AP tech and the GW scanner fail at same screen. Fronts squeeze up great no sir . Rears do nothing I've bled the line from master cylinder to the lil pump or stroke thing on passenger side no air I can now hear the rest brake pump beginning to clock . Wasn't before . The car scans a retrieves codes no issue 1364 5 are in play. Yesterday I also had low voltage code after charging 12V it seems ok and holding. If I put this actuator on original car which is rt here the brakes work perfect no codes at all . Other car has had no codes except low accumulator pressure no others . On original car it had a code for ripped out wheel sensor from accident. Cars still drives . Weird shiet. I'll wait a few days been in teens.
So now it's down to a constant 1364 no beeping and sub 222 which is press sensor not in value or such . . If input this actuator back on my car it came off of no codes stops on a dime perfect. Put that actuator on this same looking 07 car and this is happening . Originally it was 1365 accum pressure only. Looking at video. Of guy working on Lexus 400 V8 car it's out brake actuator turned on its side with a non locking slide plug . So a jumper harness plugs to actuator the locking white slide plug is on bottom of sub harness plugged to bottom of fusebox he is looking at a light purple wire I think he saying that's pressure sensor wire . But I no understand Arabic so I wonder if Lexus 400 actuator and sub harness could work on Prius . Wild. I can't imagine the skid control just went bad while I'm sitting in the driver's seat playing with car not moving driving etc . Weird . So the workup says actuator skid control ECU or wiring there were some wiring issues shielded wiring up on engine end were sliced but not cut . I cut a rejoined w scotch lol connectors I have the fine shielding intact . . With this wiring not spot on car would not go teady. As soon as reconnected the car boots and drives but 1364 222 remain .
