Hello. My first post, excuse any mistakes. I removed the flat black plastic panel on the front bumper and found this connector. I assume Red=power, white=ground, green=turn signal. Can I hook this up and have working lights there? Parts I think I need: *Cord Assembly81935-47060) *Front Bumper Side Molding (Right Hand 52712-47060) *Led Illumination Lamp Assembly (Right Hand 812A0-47020) Am I missing anything? Thank you for your help.
An update: The white connector with the 3 orange plugs comes off to reveal a fully-functional power connector. *This plugs into the Cord Assembly. *The Cord Assembly has 2 tails, one of which plugs directly into the LED Illumination Lamp Assembly (the other tail is for fog lights - seal it off to prevent fouling or short circuits). *In the passenger-side fuse box in the engine compartment there is a missing 10A fuse (the only open slot in the fuse box). The web site "startmycar" and the fuse box map lists it as "DRL" (see photos). The clearance lamps turn on and off along with the main lights just as they should, OEM-spec. Two notes 1) The lights do not turn on and off with the main DRLs (the main DRLs appear to be the primary headlights running at a lower power level). 2) The lights do not flash yellow for a turn signal. I am looking into ways to remediate these.
