HELP!!! HUGE missfire causing Prius to clang and bang!

Discussion in 'Gen 3 Prius Main Forum' started by Priski, Jan 23, 2026 at 1:52 PM.

Tags:
  1. Priski

    Priski Junior Member

    Joined:
    Sep 21, 2023
    33
    8
    0
    Location:
    New Jersey
    Vehicle:
    2013 Prius
    Model:
    Three
    The Problem: My 2013 Prius has a rough idle/engine shake and a Short Term Fuel Trim (STFT) of +18%. It is throwing a general misfire code along with specific codes for Cylinders 1 and 2.

    Work Already Completed:

    New Parts: Throttle body, ignition coils, and spark plugs.

    EGR System: Both the EGR valve and EGR cooler are new, clean, and recently replaced.

    Head Gasket: I have confirmed this is NOT a blown head gasket.

    The Theory: I suspect a high probability of air bubbles in the cooling system. I recently replaced several coolant hoses in the rear of the engine and believe air is trapped near the temperature sensors.

    The Plan:

    Vacuum Fill: I am performing a full vacuum-refill of the cooling system using a professional HVAC pump and refill kit to ensure it is 100% air-free.

    Smoke Test: If the vacuum fill doesn't drop the fuel trims, I’m moving straight to a smoke test to check for unmetered air/intake leaks.

    Question: Beyond the common intake manifold gasket, are there other specific spots on the Gen 3 intake or EVAP system where unmetered air leaks are common enough to cause an 18% trim?
     
  2. AzusaPrius

    AzusaPrius Senior Member

    Joined:
    May 27, 2020
    2,200
    924
    0
    Location:
    California
    Vehicle:
    2010 Prius
    Model:
    IV
    Try a 12v battery disconnect for 10 minutes.

    Air in the coolant will not cause your misfires.
     
  3. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    2,309
    922
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    You told us about the short-term fuel trim (STFT). What is the long-term fuel tirm (LTFT)? You add the STFT and the LTFT together to get the total fuel trim.

    As already mentioned, air in the engine coolant system will not cause misfires in the engine.
    There is a vacuum hose connected to the intake manifold near the throttle body. The hose runs over to the VSV valve. Also, there is a vacuum hose on the other side of the VSV valve that then connects to a steel tube near the EGR valve. Those two hoses are prone to cracking at the ends.
     
    #3 Brian1954, Jan 23, 2026 at 2:19 PM
    Last edited: Jan 23, 2026 at 2:29 PM
    PriusCamper likes this.
  4. Mendel Leisk

    Mendel Leisk MMX GEN III

    Joined:
    Oct 17, 2010
    60,531
    41,685
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    How did you confirm that? By chance with the syringe-of-liquid drawing up coolant test? That only tests for carbon monoxide in coolant, which is NOT the usual head gasket failure mode.

    What's the miles?

    First time cleaning the EGR?
     
  5. indel

    indel Member

    Joined:
    Apr 1, 2024
    217
    77
    1
    Location:
    Northwest Indiana
    Vehicle:
    2012 Prius
    Model:
    Two
    This requires more scrutiny as Mendel suggests above.
     
  6. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    12,876
    5,218
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    Bad hoses is a good place to start... Also move around the ignition coils and see if misfire codes move to different cylinders.

    If the misfire codes were in cylinder #3 and #4 I'd be more in agreement that you've eliminated headgasket concern and its something else. But all the premature headgasket failures in Gen3 is a super tiny near microscopic coolant leak between Cylinder #1 and #2 and often takes years to go from symptoms an occassional rough cold start to actual engine failure.
     
    #6 PriusCamper, Jan 23, 2026 at 6:43 PM
    Last edited: Jan 23, 2026 at 6:48 PM