1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Ultimate Lockpick 3 and iPod Interface Installs Sucessful !

Discussion in 'Gen 2 Prius Accessories & Modifications' started by starkeef, Feb 5, 2007.

  1. starkeef

    starkeef New Member

    Joined:
    Jan 13, 2007
    11
    0
    0
    I did it. I installed my Ultimate Lockpick 3 and iPod interface!
    It only took me two hours and it couldn't have been easier.
    Thanks to Evan for giving me the confidence to push ahead.
    There are two things, though, I would recommend to those "first timers". One of which I learned the hard way.

    1. ALWAYS put down some towels on the dashboard. If you are removing the nav screen and setting it there,
    it will scratch the dash. Which I did, and my wife was not happy about.

    2. I used some nylon dashboard pry tools that I ordered from The Eastwood Co.
    The web link is: http://www.eastwoodco.com/jump.jsp?itemID=...temType=PRODUCT
    They cost about $30.00 for 12 tools, but they made the job very easy and didn't mess up any of the dash.
    And if anybody wants you to do their Prius, just charge them $30.00 for the install and you've made back
    your investment.

    Other than that, it was a by the book install. CoastalE's instructions were simple and easy to follow.
    Give it a shot. If I can do it, you can.
     
  2. txav8r

    txav8r Senior Member

    Joined:
    Jan 27, 2007
    43
    6
    0
    Location:
    DFW, Texas
    Vehicle:
    2010 Prius
    Model:
    IV
    <div class='quotetop'>QUOTE(jonathan_s @ Feb 5 2007, 04:09 PM) [snapback]385718[/snapback]</div>

    Hello Johnathan,

    I have an 07 Prius and have installed the Ultimate Lockpick 3 along with the EV and Auto Doorlock mods. I wanted to find an iPod interface also. I have talked to Coastaetech and understand theirs does not use the steering wheel or MFD controls but instead has a remote control that I don't think I would prefer due to added distraction and another accessory to keep up with. Can you tell me what interface you used, how it works, how it hooked up, how you like, etc.? Sure appreciate it!
     
  3. desynch

    desynch Die-Hard Conservative

    Joined:
    Feb 14, 2007
    607
    2
    0
    Location:
    Lakehouse
    Vehicle:
    2007 Prius
    <div class='quotetop'>QUOTE(txav8r @ Feb 6 2007, 01:39 PM) [snapback]386120[/snapback]</div>
    Yes, I would like to know exactly HOW you plug the video Ipod into your Ultimate Lockpick 3.. Does it plug into the regular AUX port? Does the kit have you run a cable and create a new "video" AUX port?

    What plugs into where.. can you show us the instructions?
     
  4. dzucc

    dzucc New Member

    Joined:
    Jan 22, 2007
    35
    0
    0
    <div class='quotetop'>QUOTE(desynch @ Feb 17 2007, 09:27 PM) [snapback]392215[/snapback]</div>
    desynch,
    The plug in that he is talking about is the I-Link by Valor. Be very careful to make sure that your generation ipod will work. My new 30gb Video ipod did NOT work because Apple changed their OS software. Valor is trying to make the fix, but, I got tired of waiting. I went to Radio Shack and purchased an audio/video cable with the ipod 3.5mm plug on one end. I plugged the red, white and yellow plugs into the lockpicks matching cables and routed the 3.5mm end into the back of the glovebox. It works great. You control the ipod from the ipod unit itself and it hides nicely in the glovebox. I paid about $10 for the cable instead of $119.00 for the I-link. Hope this helps.
     
  5. diverlee

    diverlee New Member

    Joined:
    Sep 7, 2006
    27
    0
    0
    Location:
    Williamson, NY
    Vehicle:
    2006 Prius
    Model:
    N/A
    <div class='quotetop'>QUOTE(jonathan_s @ Feb 5 2007, 02:09 PM) [snapback]385718[/snapback]</div>


    Good for you! I did mine this weekend. And like you, scratched the dash. We should have seen that one coming, huh? I didn't go for the iPod interface, don't have one.

    The RCA cable plugin jacks that come with the Ultimate Lockpick are a bit short at less than ten inches. I was wondering how you would expose these for future plug and play use.

    Luckily, I found a great extension cable accessory from Radio Shack for $15 (Part No. 15-1997, male to female, "A/V Extend-a-Jack", with an S-video connector as well as RCA connectors for regular video and both right and left audio channels). The original purpose of this product was to replicate the rear connections of a VCR and bring them forward for easier connectivity.

    Although the S-video connector was a waste, the rest of the cable was great. It had about ten inches of individual cables to plug into the Lockpick connectors (with another "piggyback", or Y, connector, if needed in the future) and then they all merged into one heavy 6-foot cable with a fabulous hard plastic terminal ending with all inputs on a flat plane, not unlike what you would expect on any other high end A/V component input connector. I hid the individual connectors behind the dash and routed the heavy part of the cable under the center lower dash cover and coiled it on the floor between the two front seats. It looks very professional. Other than the blatant Radio Shack logo.

    Now, I have a convenient place to plug accessories into, and the cable can reach to the back seat for passengers with a mobile DVD player or other audio input device. Sometimes things just work out fine and we win. D.L.
     
  6. orrink

    orrink New Member

    Joined:
    Feb 23, 2007
    7
    0
    0
    I use the Gigabeat video/audo player with 3.5 mm output. Can't I just plug it in the aux and get video with the lockpick 3?




    <div class='quotetop'>QUOTE(jonathan_s @ Feb 5 2007, 02:09 PM) [snapback]385718[/snapback]</div>

    <div class='quotetop'>QUOTE(driverlee @ Feb 25 2007, 09:56 PM) [snapback]396568[/snapback]</div>
    I use the Gigabeat video/audio player with 3.5 mm plug. Can I just plug it in to the AUX and get video with the Ultimate 3