1. Attachments are working again! Check out this thread for more details and to report any other bugs.

I added a new handle to the '08

Discussion in 'Gen 2 Prius Main Forum' started by jelloslug, Feb 8, 2009.

  1. BerkshirePrius

    BerkshirePrius New Member

    Joined:
    Apr 16, 2007
    121
    3
    0
    Location:
    Berkshire, NY
    Vehicle:
    2005 Prius
    I've been meaning to due this mod since seeing the previous install, but have had trouble finding an '05 Corolla seat (cheap). You state from '03 to '08 will work, huh? Time to go to the local U-pull it. This will be my next project. Thank you.
     
  2. jelloslug

    jelloslug It buffed right out!

    Joined:
    Jun 11, 2008
    813
    54
    0
    Location:
    Greenville, SC
    Vehicle:
    2008 Prius
    Yes, any '03 to '08. I think a 1st generation Matrix/Vibe seat will work also. They have the same plastic trim on the lower section and the mounting feet are in the same location as the Corolla. The Scion Tc has a very similar looking seat configuration also but it has an extra control for the lower bolsters that may not be compatible with the Prius seat.
     
  3. b11101100

    b11101100 Spectra Blue Mica Driver

    Joined:
    Apr 17, 2008
    58
    2
    0
    Location:
    Arizona
    Vehicle:
    2008 Prius
    Looks like it's spreading. Here is another one...

    I started with an '06 corolla seat I picked up from a junkyard for $25. While I had the seat opened up I also added two pnuematic lumbar support bags for additional comfort. One in the center of the seat back and the other in the front of the seat bottom. I've got the seat back together and installed, but don't have the controls for the lumbar support hooked up yet.

    I attempted to quantify the difference this made in seat position. This can be seen in the attached photo.
     

    Attached Files:

  4. westy72658

    westy72658 Jim Coleman Toyota in Bethesda, Maryland

    Joined:
    Feb 19, 2009
    110
    67
    0
    Location:
    Louisa, KY
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    Cool, I am not very tall, but I would love that option for extra comfort on long drives!
     
  5. jelloslug

    jelloslug It buffed right out!

    Joined:
    Jun 11, 2008
    813
    54
    0
    Location:
    Greenville, SC
    Vehicle:
    2008 Prius
    Very cool! Did you have much trouble with your conversion? In the end I ended up adding some spacers under the front feet of the converted seat. My wife did not like the drop in the front edge and the spacers fixed it perfectly. I actually like it better now with the spacers added because it gives me even more knee support with the seat down.
     
  6. patsparks

    patsparks An Aussie perspective

    Joined:
    Jul 12, 2007
    10,664
    567
    0
    Location:
    Adelaide South Australia
    Vehicle:
    2004 Prius
    Model:
    N/A
    How high is your lumbar region? I always thought just above your pelvis?
    Good job.
     
  7. thedutchtouch

    thedutchtouch prius is my SUV

    Joined:
    Jul 5, 2008
    181
    1
    9
    Location:
    Baltimore MD
    Vehicle:
    2007 Prius
    Model:
    N/A
    the lumbar spine starts with your L1 vertebrae which is roughly at the same height as your 9th rib. your 9th rib is one of the "false ribs" that connects to cartilage rather than to your chest bone.

    it looks like the pneumatic support bag he put in is a bit high. but hey, if its comfortable to him thats all that matters.

    what i want to see is the controls for the lumbar support:rockon:
     
  8. b11101100

    b11101100 Spectra Blue Mica Driver

    Joined:
    Apr 17, 2008
    58
    2
    0
    Location:
    Arizona
    Vehicle:
    2008 Prius
    The conversion was more work than I thought it was going to be, but hopefullly well worth it. I've only driven it a couple of miles so far and love the increased visibility from sitting a little bit lower. I'm getting ready to drive over 1000 miles this Saturday. I'm hoping this modification makes that trip more comfortable.

    I didn't add any spacers and noticed even at the highest level the front of the seat sits a little bit lower. I added the air bladder up there and should be able to raise the front end a little bit more with that.
     
  9. b11101100

    b11101100 Spectra Blue Mica Driver

    Joined:
    Apr 17, 2008
    58
    2
    0
    Location:
    Arizona
    Vehicle:
    2008 Prius
    It is too high to be true lumbar support. I guess it would be better to describe it as mid back support. It is different for everyone, but for me that's what felt the best.
     
  10. b11101100

    b11101100 Spectra Blue Mica Driver

    Joined:
    Apr 17, 2008
    58
    2
    0
    Location:
    Arizona
    Vehicle:
    2008 Prius
    The '03 and '04 that I found had a slightly different configuration. They did not have a lever for height adjustment. Instead they had a circular knob that adjusted something. I ended up restricting my search from '05 - '08.
     
  11. QuiGonJohn

    QuiGonJohn Junior Member

    Joined:
    Feb 1, 2009
    79
    3
    4
    Location:
    Davie, FL
    Vehicle:
    2009 Prius
    I would love to do this, but this seems too complicated for me. Too bad Toyota doesn't just sell a replacement seat that has the lift mechanism in it already.

    Do the Recaro's mentioned on this site have height adjustment?
     
  12. zenMachine

    zenMachine Just another Onionhead

    Joined:
    Mar 3, 2007
    3,355
    300
    0
    Location:
    Texas
    Vehicle:
    2007 Prius
    Wonder if one could retrofit a G3 seat into a G2 Prius...

    BTW, awesome job, jelloslug. That is one heck of a mod.
     
    1 person likes this.
  13. QuiGonJohn

    QuiGonJohn Junior Member

    Joined:
    Feb 1, 2009
    79
    3
    4
    Location:
    Davie, FL
    Vehicle:
    2009 Prius
    Anyone have a good link for the Recaro seat mentioned on this site. I see it mentioned often, but no link. Search isn't helping. And I went to Recaro's web site and no matter how I look there, I keep getting brought back to some child safety seats.
     
  14. jelloslug

    jelloslug It buffed right out!

    Joined:
    Jun 11, 2008
    813
    54
    0
    Location:
    Greenville, SC
    Vehicle:
    2008 Prius
    You could import a Euro Prius drivers seat.
     
  15. rrobin1057

    rrobin1057 New Member

    Joined:
    Nov 27, 2008
    24
    0
    32
    Location:
    Park Forest , IL
    Vehicle:
    2008 Prius
    Model:
    II
    where and how much can we get it for our prius's
     
  16. Boo

    Boo Boola Boola Member

    Joined:
    Feb 13, 2007
    5,051
    485
    97
    Location:
    Flushing, NY
    Vehicle:
    2007 Prius
    Model:
    N/A
    John,

    The Recaro website is terrible. But here's a link to its page for its "Ergonomic" line of seats:

    .: RECARO :..

    If you're really interested, I would suggest finding a dealer near you and calling them and going there personally. They might have Recaro seats not shown on the page I linked for you, e.g., the XL model seat that a PriusChatter recently installed on his Prius, and should be able to answer questions that the terrible Recaro website does not.

    Be advised that we're talking in the neighborhood of $3000 installed.
     
  17. cycledrum

    cycledrum PSOCSOASP

    Joined:
    Apr 9, 2008
    8,245
    1,202
    0
    Location:
    NorCal
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    jelloslug,

    I missed seeing this thread until now ...

    major hats off to you for excellent work

    :rockon:
     
  18. Ytsejamer1

    Ytsejamer1 Junior Member

    Joined:
    Mar 8, 2009
    79
    6
    0
    Location:
    Somersworth, NH
    Vehicle:
    2006 Prius
    I wish I had the time and know-how to really do this mod myself. I'm not even 6'1", but find i'm lowering my head to see the lights and whatnot. Well done to all who have done this mod.
     
  19. cycledrum

    cycledrum PSOCSOASP

    Joined:
    Apr 9, 2008
    8,245
    1,202
    0
    Location:
    NorCal
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    jelloslug,
    If the mounting points for the floor pan are totally different, how did you get the Corolla rack to bolt to the Prius chassis? In the Prius, the left rear (looking forward) the bolt goes downward, on the right, the bolt is sideways.

    Did you weld the Prius feet onto the Corolla rack to match the footprint?
     
  20. cycledrum

    cycledrum PSOCSOASP

    Joined:
    Apr 9, 2008
    8,245
    1,202
    0
    Location:
    NorCal
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Also, does this mod allow you to move the seat bottom back as far as the stock Prius mount?

    Does it allow you to lower the back of seat bottom 1 to 2" without raising the front height of the seat?