1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Bluetooth phone hard to hear. Suggestions??

Discussion in 'Gen 3 Prius Main Forum' started by winebuff, May 31, 2009.

  1. winebuff

    winebuff Proud owner of a 2010 Prius

    Joined:
    Jun 17, 2007
    443
    87
    0
    Location:
    Oregon
    Model:
    IV
    On my bulilt in bluetooth in the car, people say it sounds like I am in a tunnel. Are you getting the same thing and if so, how do you correct the sound? Do I need to take it in or can I tweek it myself? Thx!
     
  2. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Mine sounded quite faint. I had to do the menu dance and increase the volume. Even in the diagnostic screen, I can only bump 1-2 bars of green (on a sound meter in the display) unless I shout. I'll dig through and see if there's a way to set the gain. Otherwise we may be making our first warranty claims ;)
     
  3. firepa63

    firepa63 Former Prius Owner

    Joined:
    Jul 23, 2005
    1,761
    208
    0
    Vehicle:
    Other Hybrid
    Model:
    N/A
  4. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    The menus are slightly different in the 2010. I'll video and YouTube how I got to mine.
     
  5. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    As promised... the method I use to improve the receiving end's Bluetooth experience.

    [ame="http://www.youtube.com/watch?v=-gwQpvpYVYg"]YouTube - Broadcast Yourself.[/ame]
     
    7 people like this.
  6. pie

    pie New Member

    Joined:
    May 13, 2009
    5
    1
    0
    Location:
    CA
    Model:
    V
    Nice video, thanks! Just a quick note that even the turning on/off of the headlight switch when pressing the info/phone button gets to the same initital diagnostic screen.
     
    1 person likes this.
  7. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Yep, I'm aware of that as well and think I mentioned in the YouTube video caption somewhere that there's "more than one way". With a fixed camera position, this was easier to demo.
     
  8. winebuff

    winebuff Proud owner of a 2010 Prius

    Joined:
    Jun 17, 2007
    443
    87
    0
    Location:
    Oregon
    Model:
    IV
    Rick, THX!!!! Going to try it now. Wish me luck :)
     
  9. winebuff

    winebuff Proud owner of a 2010 Prius

    Joined:
    Jun 17, 2007
    443
    87
    0
    Location:
    Oregon
    Model:
    IV
    :mad: Didnt work. Every time I tried to push the 2 buttons upper and lower, it stayed on the genral setting screen. Wouldnt let me do it??
     
  10. Vincent

    Vincent Don't Wait Until Tomorrow

    Joined:
    Sep 5, 2005
    641
    31
    0
    Location:
    South Florida
    Vehicle:
    2010 Prius
    Model:
    V
    I had the same problem; the headlight switch dance described above by pie worked.
     
  11. synapse

    synapse Junior Member

    Joined:
    Jul 12, 2008
    30
    5
    0
    Location:
    Greater Philadelphia Area
    Vehicle:
    2013 Prius
    Model:
    Three
    Is there a similar setting for those without navigation?
     
  12. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    You have to do it rather quickly, and it's not a "button", but just the location of the screen - all the way left right under the upper and and above the lower line.

    If not, you can try the headlight trick as well.
     
  13. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    I can't say - your dealer may know. Ideally, I'd like to find a way to improve the response of the microphone itself, but haven't found a user accessible setting yet as we shouldn't have to turn volume all the way up just to get acceptable performance. Even at 5, I have to speak on the loud side of "normal conversation" to be clearly heard.
     
  14. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    Thanks. The receiving party's volume/clarity was an issue, and after this change, it's better.
     
  15. greylar

    greylar New Member

    Joined:
    May 15, 2008
    283
    38
    0
    Location:
    Montana
    Vehicle:
    2010 Prius
    Model:
    III
    I would like to know this as well. I just couldn't swing the nav, but use the bluetooth phone all the time... anyone without nav experienced this problem... haven't got mine yet.

    G
     
  16. a priori

    a priori Canonus Curiosus

    Joined:
    Aug 14, 2007
    3,083
    407
    23
    Location:
    Chicagoland (West)
    Vehicle:
    2010 Prius
    Model:
    V
    I haven't yet asked about the volume on the receiving end, but I do know that every time I answer and first say "hello" I am not heard (or there is no response). It appears I need to say "hello" and then repeat it to be heard. It doesn't seem to be volume related, and it doesn't even change if I wait an inordinate amount of time before talking (after having "answered" the call).

    Observations? Comments? Suggestions?
     
  17. greylar

    greylar New Member

    Joined:
    May 15, 2008
    283
    38
    0
    Location:
    Montana
    Vehicle:
    2010 Prius
    Model:
    III
    on my 08 you have to do that but if you wait for 1/2 before saying anything they hear you the first time.

    Still wondering if I didn't mess up by skipping nav.

    G
     
  18. a priori

    a priori Canonus Curiosus

    Joined:
    Aug 14, 2007
    3,083
    407
    23
    Location:
    Chicagoland (West)
    Vehicle:
    2010 Prius
    Model:
    V
    Thanks, greylar, but I do wait . . . and wait . . . and it still doesn't "clear." I'm wondering if there is something else I need to do.
     
  19. greylar

    greylar New Member

    Joined:
    May 15, 2008
    283
    38
    0
    Location:
    Montana
    Vehicle:
    2010 Prius
    Model:
    III
    I'm thinking this might have something to do with the phone. Is there some kind of VOX setting on your phone? You might try syncing a model/brand different phone just to see if you have the same issue.

    G
     
  20. royrose

    royrose Senior Member

    Joined:
    Mar 21, 2009
    1,389
    948
    4
    Location:
    Foot of Pikes Peak
    Vehicle:
    Other Hybrid
    Model:
    Limited
    I don't have a new Prius yet also. One option, since you are not getting built in Nav is to get one of the more full featured Garmins that have voice recognition. Some of those models have bluetooth phone capability and work well. I does seem like you shouldn't have to do this, but it may be another example of cheaper portable electronics working better than those built into Toyota vehicles.

    Roy