1. Attachments are working again! Check out this thread for more details and to report any other bugs.

HELP!!!! Please?

Discussion in 'Generation 1 Prius Discussion' started by Dragonfighter, Aug 6, 2009.

  1. Dragonfighter

    Dragonfighter New Member

    Joined:
    Aug 3, 2009
    11
    0
    0
    Location:
    Texas
    Vehicle:
    2002 Prius
    Model:
    N/A
    I disconnected the negative cable on my 2002 Prius to try and clear the Japanese menu on the Nav system and when I reconnected, the car starts, followed by the red triangle illuminating on the cluster, a Warning screen comes up on the display with the silhouette of the car flashing red with and exclamation point and then it shuts down.

    I tried to disconnect again and even jumped the auxillary battery with no joy. This is an emergency. Please help.
     
    #1 Dragonfighter, Aug 6, 2009
  2. Dragonfighter

    Dragonfighter New Member

    Joined:
    Aug 3, 2009
    11
    0
    0
    Location:
    Texas
    Vehicle:
    2002 Prius
    Model:
    N/A
    Okay, panic is over, I disconnected the cable again and put the auxillary on the charger for about half an hour, at that point it only showed a 50% charge.

    I went ahead and hooked it all up and said a little prayer. It all came on with no warnings and I drove it until a recharge of the main battery was complete. Still can't get rid of that Japanese menu though.
     
    #2 Dragonfighter, Aug 6, 2009
  3. firepa63

    firepa63 Former Prius Owner

    Joined:
    Jul 23, 2005
    1,761
    208
    0
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I think you are stuck with the menu. Was the car originally registered/used in Japan?
     
    #3 firepa63, Aug 6, 2009
  4. Dragonfighter

    Dragonfighter New Member

    Joined:
    Aug 3, 2009
    11
    0
    0
    Location:
    Texas
    Vehicle:
    2002 Prius
    Model:
    N/A
    Negative, according to Carfax it has spent its entire life in Texas. I guess I will have to fix/replace the navigation unit if I want it to go away.
     
    #4 Dragonfighter, Aug 6, 2009
  5. V8Cobrakid

    V8Cobrakid Green Handyman

    Joined:
    Jun 6, 2004
    3,790
    152
    0
    Location:
    Park View, Los Angeles, CA. U.S.A
    Vehicle:
    2004 Prius
    Model:
    N/A
    there should be a way to select language. wait around for a gen 1 owner to respond...
     
    #5 V8Cobrakid, Aug 7, 2009
  6. reverai

    reverai New Member

    Joined:
    Jun 30, 2009
    119
    9
    0
    Location:
    Alexandria, VA
    Vehicle:
    2008 Prius
    Model:
    N/A

    Actually someone who reads Japanese might be better...

    Steve
     
    #6 reverai, Aug 7, 2009
  7. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,369
    15,511
    0
    Location:
    Huntsville AL
    Vehicle:
    2018 Tesla Model 3
    Model:
    Prime Plus
    We can't rule out a 12VDC problem. If you have a VOM, we need to see 13.9 VDC on the 12 V battery while the car is parked and in "Ready" mode.

    The 12 V system provides power for the six, control computers that run the car. If there are problems here, the car rapidly becomes inert.

    Can you post a photo?

    Bob Wilson
     
    #7 bwilson4web, Aug 7, 2009
(You must log in or sign up to post here.)