Separate names with a comma.
Read this Entire Tread:
Just Bought a 2012 For $700 with a Blown Head Gasket | PriusChat
It should answer a lot of your questions
Should do a Meet up in The Rogue Valley Oregon
It would be fun to add a dash light to indicate when the EGR is open. Besides a OBDII :D:D:D Just for fun!!!
I have the old 208 motor in my garage waiting for repair.
1) Yeah, I'm sure they lied about mileage
2) Was determined to be cold weather...
Most of the time there is no problem with the Head or Block. BUT......
If there is any doubt, Take the head to a machine shop.
Be sure to install a OCC and a new PCV valve then clean out the EGR and EGR Cooler as well as Throttle body and Intake Manifold as recommended by...
The Engine is "SOLID" .... The head gasket is the week point,
If the engine never overheated, I would NOT worry about warping of the Cylinder...
Yeah, I bought a used Engine with 90 something thousand miles on it (yeah right) I showed up with a bad head gasket.
Just Bought a 2012 For $700...
Cracks, splits or missing chunks of rubber.
Should feel stiff.
Toyota is my favorite.
Prius is Super Fun to work on.
It's nice that you don't have to remove the inverter assembly in the Gen 3...
I do about 80 Miles a Week o_O
Every 3 months, I take a 700 mile round trip.
So, I takes forever to rack up miles.
I was asked for a update so I opened it up and took a picture :D
I don't live on the coast.
That was the Red 2011 car that had Gas pooled atop the intake valves.
The Motor is running Fantastic.! (230 miles on the new Head Gasket)
No Oil in the Catch Can! (just Water!!!) 62 Miles with the OCC
It's actually Super easy to do a engine swap on the gen 3
Check out this thread.
Just Bought a 2012 For $700 with a Blown Head Gasket | Page 2 |...
Catchama Can Can