Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
A quick search for "PCV torque" here on PC, yielded this : https://priuschat.com/search/191426725/?q=pcv+torque&o=relevance And the second result...
Hey all -- I installed a new PCV valve in my 2009 Prius but not sure if I screwed it in tight enough. The reason is that there is no torque...
wicked tips for pcv valve! thx guys what's torque value lol?
Does anyone know the torque specs for the PCV valve? .
I'd like to replace my PCV valve, but I have two questions: 1) Do you put some kind of thread sealant on the valve? 2) What's the torque value?
Thank you very much for your answer and PDF for PCV valve. Do you have part nr.? Or a suggestion in which part do I need to search for it in the...
A deep socket works fine, and allows you to torque it.
The leaks into the spark plug well might be caused by excess pressure in the camshaft area? Due in turn to PCV valve not working?? Still, those...
Hello, I replaced the PCV Valve on my 2007 2nd Generation Prius last night and assumed it needed to be tightened so that it was completely flush...
Damaged or dirty PCV valve? 2 Causes For Toyota Prius Rattle On Startup; And What To Do About It | Torque News
Thank you for info, I missed that, because I did not look for torque values in the picture. And I have finally found PCV valve part nr....
That's confused on several counts. There's no "blowby pressure" in the crankcase until blowby gas volume flow rate exceeds the PCV valve flow...
The last leg of the EGR circuit is those passages in the intake manifold. Until they're cleaned EGR flow continues to be restricted. The PCV is...
Thank you so much! does anybody have a video of at least part of this?
I've seen some posts where people have removed the wiper arm assemblies and the cowl to replace the spark plugs and Vent Valve subassembly (PCV)....
Update on my side (the original poster)... Could be unrelated but no active P0420 CEL for me after I replaced the spark plugs and PCV valve while...
The fittings that came with my original OCC was good except the shoulder was only a 17mm hex and the PCV Valve has a 22mm HEX... It barely covered...
1. Use a bead of FIPG sealant at two places, where the engine front cover attaches to the cylinder head. When the engine valve cover is in...
Don't think my links have info on the pcv valve. Attached is repair manual excerpt. FWIW, I used LOCTITE 243 Threadlocker Blue thread on the PCV...
Hi all, Wouldn't it make sense to attempt to also remove the inverter coolant reservoir, just to get more room to maneuver around the PCV valve...
