Separate names with a comma.
Are you still running the original 12v battery? If so what year is your car?
This happened to me twice not once with the #1 cylinder not working.
When unplugging the fuel injector harness for cylinder #1 the single wire...
It was a 2015 Toyota Prius V with about 150k. Not too sure why it happened, but this is the 1st leak we seen on a Gen 3
It’s the rear Main Seal that has a leak which was confirmed when the engine was taken out. Red stuff is Toyota thread Lock which will be...
Without you it would not be possible [emoji120]
A simple headgasket install turned out to be a deeper problem.
This is from a 2015 Prius Engine so no Bueno. Just make sure you inspect...
Just take off the single bolt that holds the entire assembly. No need to mess with that clip at all! I have done so many EGR jobs that you just...
Something is off on that price. Are we taking about the good stuff, Toyota ATF WS or the generic stuff?
Orange is the latest color. Confirmed many times while driving on the Freeway and from cars that are parked
Quite an impressive job!
Tein Flex A is the way to go! It’s Tein’s latest
Coilovers - Rides better then stock without the harshness of the Flex Z [emoji106]
Pcv valve is a one way check valve. This would lead a backflow of oil from your new location down to the original location of pcv valve. Just a...
Please don’t use motor oil to the plunger. Last thing you want to do is introduce oil to a clean valve.
Just fully disassemble the valve (2...
It’s about 4 to 5 hours with the right tools. The rear is easy so no biggie [emoji106]
Here is a pic of one of the installs. If anyone in the SoCal region, give me a DM for an installation quote
Installed so far 3 sets, tricky part is that you will need to lower the Front subframe to install the front Sway Bar.
Cusco for the Win
Interesting. Is the coolant in the reservoir bright pink? Or a darkish color?
At anytime before the swap, did you use headgasket sealant that you would poor into the coolant reservoir?