Separate names with a comma.
Ok fixed well sucks when this happens. Did 2 things and didn't have time to test between the two.
I replaced all 6 break hoses.
Then I changed...
Same pump same setting.
Look for flushable wet wipes. No TP in my Walmarts but they had wipes I like better anyway.
First time cons said 50mpg and actually got 50mpg
The CV joint itself. There is caged ball-bearing fixed to the shaft then slid into sized channels on end piece. The channels and bearings ware and...
What is not normal is when you say clicking noise happens. CV joints in my experience and commonly known to click during turns not breaking. Could...
I won't be paying that much of and when this engine takes a crap again. Next time I plan on getting cylinders bored and sleeved with new pistons...
It will leak with just silicone on it. You must get it out or have it taken out.
Oh no sky is falling.
Reaction = kill economy as fast as possible.
Oil can content for 2k miles. I guess pretty good for this strange pcv system. I'm watching the oil separate. [ATTACH][ATTACH]
Posted via the...
Might be open next month.
Make sure you slide handle to safety plug to right after you cantilever it to left.
Apparently most people here say it's ok but if I remember correctly from automotive school cleaning the top of pistons comes with a danger of...
U didn't worry about getting stuff in rings
Without seeing all the pistons down so I can see the cylinder walls and without checking for warpage. Looks like you should check more.
Yup coolant is pink so why the white.
Need to decide budget. How much are you willing to put into this.
1 Need to carefully clean head and block
2 need to check for warpage on both....
I didn't say not torqued enough. Oh I had enough torque. Using a 3ft breaker bar to tighten should have provided excess torque.
I said they back...
They used to keep valves closed with compressed air through sparkplugs to do valve stem seals.
Did you lock tight the control arm bolts. I didn't and they came loose creating a clunk also. I took them out and lock tight them and no clunking...