Separate names with a comma.
EGR valve body is a bit tricky to remove , if you have not work on your Prius at all have a plenty of time look at YouTube videos on how to do it.
I had a same issue 2 yrs ago, misfire on 1or 2 and 3 techs including the dealer could not pinpoint the problem( we replaced ign coils, spark...
I can say rockauto.com has a decent quality or carquest.com . I have purchased from both breaks for my cars and other parts as well.
Did you find a replacement engine yet?
I got mine from here last year. They set it was 30k ml and give you 6months warranty unlimited miles. Mike shire your clutch is in tact when...
my guess is that will be temp resolution. I had a knocking engine few months back and EGR was the first thing that was a cleaned. I had a...
I would say that is very unusual bellow 100k but possible.
Mine gave up on 175k.
I did swap engine due to less hassle and cost. Got one...
I did it with a cherry picker and did not even disconnect the a/c compressor.
You did it from under, wow.
I had the same issue (check hybrid sys.) On my gen 3 and I did disconnect the 12v battery for 30min. After that it ressets and warrning goes away.
Gen 3 has a belt pulley on the side of the water pump that has no belt on it (gen 2 has the belt) remove that pulley in order to remove the engine...
What year is your Prius?
How to reset
Check Hybrid System Warning Screen
after replacing the engine?
I did just replaced my engine on 2012 gen3 and did it with a hoist. It will be very difficult without one. Either use a hoist from top or lift the...
170k, with head gasket issue leaking in cyl1
Hi Paul! I'm half way removing my eng. but can't find a way to remove the 6 bolts to disassemble from transm. Mine is 2012 prius and I'm...
How did you remove the bolts conecting eng and tram/inverter?
Hello, I'm about to do an engine swap on my 2012 prius due to the fact that I get some coolant in cylinder 1 and it is miss firing and rattling...
How did the conversion go?