Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
A gen 3 dashboard mod?
Relevant docs indicating gen3 excessive oil consumption Prii were from 2010-2014. The pdfs include production vins that started using the...
The documented proof will come when a large number of cars that have had their oil changed at 10K (vs. 5K) go past 100K, 150K and 200K miles and...
There is no problem with a little oil use between changes. It is perfectly normal for a little oil to get by the valve guides or rings especially...
Interesting observation. I check our 2010 Prius II dipstick every Saturday morning and can say I haven't seen that phenomenon before. Doesn't mean...
Here is the manufacturer's link Motor Medic | Motor Flush | Get More Out With Every Oil Change or Motor Flush...
...gets to make up a number for what they consider "excessive oil consumption." The worst oil consumption I ever had in a new vehicle was a 1977...
...springiness, and the engines with them have proven more prone to develop excessive oil consumption down the road, say around 150k miles and onward.
...outward springiness). Presumably in response to excessive oil consumption reports, Toyota finnally revised the rings (and pistons to...
You have excessive blow-by. This is caused by worn out rings, cracked ring lands, cracked piston or worn cylinder walls. The excessive oil...
I would be more than willing to accept "excessive" carbon fouling of the piston's "oil" ring if tear downs revealed this problem, but no such...
...causes for excessive engine wear, more blow-by, excessive oil consumption, more oil/water/fuel in catch can and or intake manifold. The gen 2...
While you may find the oil consumption excessive -- most manufacturers say 1k per Qt .. some go as low as 750. What oil have you been using? --...
Calls for 4.5, and I'm not going to bother buying a 5th just to drain 1/2 of it. You have to be really, really low for it to have any negative...
I think the tough thing here is because you didn't have oil consumption prior to using VPBR, you won't be able to evaluate if it solves the issues...
Service fill (normal oil & filter change): 4.4 qts Dry fill (bone dry like after rebuild): 5 qts Most of the oil burners haven't excessively...
I checked on that and there is a total of 6 complements for oil consumption in the worst year, 2007: 2007 Toyota Camry Hybrid engine problems...
...If I was in that situation, say head gasket plus excessive oil consumption, I’d probably do a new (Gen 3 ) short block, and refurb the head...
Wow! looks like I bought it at the right build and time.
Well, if your PCV valve is blocked, that could lead to excessive oil consumption. Cheaper to try than a 6K engine change; it's a $5 experiment . . .
