Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Update: So I replaced the PCV valve just for the heck of it, and not the leak which was actively dripping is now barely forming a drop! While it...
Considering I did ours at 70K kms, I just cleaned with carb cleaner, cleaned the threads as best I could and applied Loctite 243 Threadlocker Blue...
Main Question: Is is really necessary to pull the manifold? I watched a video that showed the guy removing and cleaning the intake manifold with...
Where’d you buy it; is it the Toyota part? There is a torque value. If I get a chance I’ll post a repair manual excerpt with the info. I believe...
Hey Guys, While trying to change my PCV valve I think i may of accidentally torqued to hard into the engine and created a slight dent :/. I'm not...
It's referred to as "Ventilation Valve Sub-Assembly" * in this, torque value 15 ft/lb, and there's an adhesive spec: Toyota genuine adhesive 1324,...
Hi all, I am about to replace my spark plugs and pcv valve and clean the MAF sensor and throttle body. I have watched a number of videos and...
For the spark plugs, that toolset is more than enough. For the PCV valve, a racheting box wrench would work better. You might also need a metal...
You will need a wrench with a sufficiently long lever so you can exert sufficient torque to loosen the valve. Probably need to exert at least 30...
Wow, lot's of great info in here, thanks to everyone who replied. I should mention that when I did this job, I also changed the spark plugs and...
Hi Tommerdoo Your daily hill climb leaves you no options.. I would stay with orignal spark plugs from toyota.. Im not looking forward to my plug...
Well I finally installed new pcv valve that I purchased 6 years ago (part number 12204-21011). I had put off installation due to the excessive...
I just replaced the PCV on my UK spec 2007 at 135000 miles. I only had to remove the fuse box and one coil plug. I used a 19mm ring spanner...
Thanks! I will install it this way. Yeah I've read that before and made sure to check all the hoses. Will check hoses and nuts/bolts again when...
There's a fair bit of bs and cryptic description in the attachment. There is a description how to test it. Just do what you have to do to get to...
I changed the PCV valve on my 2004 today, at 70.4K miles. The rattle sound of the old valve is pretty similar to the new valve, so I would venture...
I'm even more in awe of the old-school engineers who figured out ways to make that kind of stuff happen using only, like, springs and plungers and...
14 c with 65k. Owned since new. On a cold start, when the engine fires, the car sounds terrible. Shaking and banging like there is a rod about...
I just replaced the PCV valve on my 05 Prius, which has 187400 miles on it. The valve was last replaced (supposedly) during the 120K mile service...
Well I chickened out on the piston soak for fear of hydrolock. But I pulled the air filter box and cleaned the MAF sensor, changed the plugs, and...
