Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Be really careful with your choice of spanner: open-ended style may put a hole in your valve cover, depending on where you start the stroke. The...
Thank you so much! Yes, I watched their video but they didn't mention these things. I'll go dig up some ThreeBond 1324. I tried to figure out...
I agree, our 97 Odyssey had some sort of mechanical proportioning valve that was connected to the body. A lever was connected to the rear axle...
I went with the above Jet wrench (post #24), 1/2" drive, ratcheting, swivel head, eventually. It was indespensible for removing an engine block...
Saturday I've cleaned intake manifold, EGR pipe and changed PCV valve. Today was the third day of monitoring that value and until now I'm back to...
That is why my go to advice for this epidemic on high mile Prius engines is to have a low mile (less than 100k?) engine rebuilt even if it is...
It 'let go' quite easily - no real force needed - and, when I reinstalled I was able to use my fingers to drive it most of the way in (with a bit...
In hindsight, it was not that difficult, but I made it so. I've read since then here on PC that the easiest way is to access is to remove the...
I just replaced my plugs at 180,000 miles. I don't know if they were pulled at 60k, but they were still firing okay at 180. I figured I'd do the...
To extricate the EGR valve without the cooler is difficult; I would do both together. The valve likely would be fine with cleaning, not needing to...
Awesome! Thank you! Now going to attempt the EGR fix, including new EGR, and PCV with cleaning all of the parts. Using Toyota parts, may video...
Do you wait until the engine stops running before shutting of the car? If not, there may be some fuel still in it. And there may also be some...
This is the replacement engine that I got from the parts yard that made milk shake. Was it the head gasket........ I will find out soon,...
Here are the answers : 1 Yes. 2 Two tanks. 3 I suppose so. What is a gasket ? 4 I am not sure, the mechanic said that he has cleaned it....
Ok, I think we can do this. I don’t like the idea of using the plates on that plate where the PCV attaches, because if the torque is wrong oil...
At 61,500 miles, the pristine intake and EGR "boat" has long sailed. Also, I don't think an Oil Catch Can will eliminated EGR clogging. I suspect...
When I measured the PCV Valve intake shaft, I found is ~5/8". Decided after sticking my finger in the stock rubber ventilation hose to see how...
Start saving $10k for unexpected repairs. It is a bad design engine. The engine burns oil and has excessive liquid build up in the intake...
I bought a 2011 gen 3 ran pretty well on The test drive 271k mi used my bt odb2 adapter and dr prius. I also have torque pro. I drive sometimes...
There’s only one bank in a Prius. That’s bank 1. There are two sensors bank 1 sensor 1 and bank 1 sensor 2. Sensor 2 is less important it checks...
