Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Each resistor should measure 68 ohms, +/- 0.68 ohm. That is the meaning of a 1% tolerance.
if he measures each resistor. what should the value be for a 1w 68 ohm resistor?
I just ordered 50 68 ohm 1w resistors. The seller: measured them for me and hand picked them so they would be as close to 68 ohms as possible....
What type of 68 ohm resistor did you use? I see options for 1/4 watt, 1/2 watt, 1 watt, 2 watt, 5 watt, and 10 watt 68 ohm resistors at my local...
Do a search for "68* ohm resistor mod". Actually, replacing "resistor" with "resister" will find one more relevant thread.
Yup, a resistor, about 68 ohms to terminate the TX lines.
the 68 ohm resistor will fix it, i did it today. had the same thing
...have an integrated 68Ω resistor within? If not search for 68 ohm resistor in the Audio and Accessories forum for threads that detail how to do...
I bought the auto hardness kit, that suppose to wired and add the 68 ohms registor . CC-
Could someone tell me what wattage the 68 ohm resistor needs to be please? 5w? 1w?
...this site for =3+22+87+68+56+21+49+91+12+54+13+85+14']68 Ohm resistor you will likely pull up at least one thread with the details of what you...
ccna101, did you install the 68 ohm resistor? If not you'll have issues with the AC/heat controls on the MFD.
...right in saying it doesn't really matter what wattage the 68 ohm resistor is, as it's probably less that 1 watt which is needed anyway, and I...
Maybe the connections to the MFD have not been made correctly or the gateway connection was not terminated correctly using a 68 ohm resistor.
All of them would work, go with the lowest cost which would likely be the 1/4 watt
the one I got was scosche kit from ebay. it had the bezel and adapter harness w/ 68 ohm resistor installed.
68 ohm resistor Page 4
Well, first off were the 2 - 30 Ohm resistors placed in series or parallel? If they were in series, that would be 60 ohms. If they were in...
It came with the resistor. I'll solder it in. Thanks!
