Separate names with a comma.
Yeah its finding a 200 volt input Inverter is the problem. When I installed my prolong harness I installed a #6 harness for a fuiture Inverter....
OK, so it will turn itself off. Since that's the case, it must still be balancing. It's been reading a steady 240v for several hours now, and...
Known situation, and likely related to some of their clientele having issues when taking the HV battery that low, or other longevity issues. If...
Can you use the Prolong Hybrid charger / discharger in the car with the ignition turned on? I would think not, but if you can maybe you could use...
When it comes to balancing a pack with hobby chargers they will allow you to charge up each module to approximately the same max voltage/charge....
For anyone who needs info on prolong harness pinout for Gen 2 Prius: Blue wire = positive fan #2 pin Yellow wire = negative fan #3 pin Red wire =...
I think my observation was similar. Not sure if it's genuine or just my lack of patience. ;)
Last time I checked, Prolong with a discharger and the cables so you can leave the battery in place was about $700-800. They do have cheaper...
Thank for quick replying, My Prius is about 240K miles. It is just preventive. I am in SoCal. After 15 hrs The Prolong's meter shows 236v and...
Very interesting. I'm thinking if maybe getting a Prolong charger myself. One thing I don't understand is exactly how bottom balancing works or...
You are wrong on this. Prius C has a smaller voltage battery, but Gen 3 Prius and Prius V are the same battery voltage and cells.
It depends on the mileage and where they were operated, in city traffic or in the county. Check the voltage on the blocks with a scanner...
If I understand correctly, the Prolong system is the same as cell regeneration with a Turnigy Reactor charger - but it does it collectively...
I actually received my Prolong charger this Monday and hook it up to a beaten up battery pack from a 210K miles Prius. The Prolong charger charge...
No need for fancy pulse control for the fan speed. You can vary the speed simply by reducing the voltage. The part number for the connector is...
Gen2 modules only have one screw per module on the bottom. Since all the modules have close to the same voltage and you're not getting any...
What would individual cell voltage drop be? .
To be fair, the 12.3 volts was after sitting for 10 hours with 2 incandescent bulbs on. I was surprised it was that high after a steady,...
Interesting. Would be good if they could have communicated that with the installed customer base. Wasn't aware HA had changed its guidance on...
Different voltages, you can't use the Gen 3 charger on the Gen 2 battery. I "think" you can use the discharger for both though, not 100% sure of...