Separate names with a comma.
do a battery life test with doc prius, it might be something else bringing your mpg's down. can you detail when, how much and how fast they have...
Check the battery ecu. Take it out of the chassis take its covers off and look closely at the circuit board for corrosion. Check it's plug sockets...
David, I've used a Solar BA5 electronic load tester on various 12 volt batteries. It's "non-intrusive" testing, and gets to the bottom of the...
have you done the doc prius stress test for block variations? i don't have it, but i think there is a way to get readouts under load
I'll have to wait until I pick up my BD250 discharger at the border. I send any USA shipments to ND, try to group a number of shipments to make it...
They are acceptable voltages. What voltages do not tell is how many 12v amp hours are available under load. Since the Prius does not use a 12v...
Few answers for you..... 1) Modules are counted in banks of 2 starting from the ECU side (28/2=14 banks) 2) It's not really standing voltage you...
Our fully loaded Canadian C is a lot cheaper than a fully loaded Prius here in Canada. I test drove both and, like you, I preferred the C. I found...
A lot of battery retailers (and the the dealership, though they'll charge for the test) have electronic load testers. You can pick up a DIY level...
I agree that a battery with 12.0v on it will Ready a Prius as long as it does not drop to less than perhaps 10.5v under initialization loading. A...
Just to get technical,, and an FYI,, >1 There is a load test for batteries: you put a 300 Amp (or more) load on it to simulate a typical...
Yes. That's what I was trying to say !!
I had the same problem.. It was internal open connection( intermittant showed 12 volts before trying to ready, load would open internal batt...
I've heard its the biggest of No-Nos to NEVER attempt to use a Prime (or other Prius) to jump start another car because it will see a big pull...
This is why Dr. Prius has a battery test that includes quick acceleration followed by quick deceleration, to measure under real loads.
dealers 'should' have a load tester. dealers 'should' have given the o/p the printout of the results. we have seen other cases where dealers have...
If you are asking about internal resistance then the best way to measure that is to load test them with a headlight (high and low beams at the...
Source: Prius - UPS Project A 2003 Prius: 0.25 gal/hr - with a 1 kW load 0.03 gal/hr - without a load The source has the dates and times of the...
Not to be argumentative, but in the interest of accuracy..... Load testing a battery in a Prius is not a relevant test, mostly because "CCAs" do...
It will be the two tests on the DR Prius paid program . so it looks both dynamic and static .Full battery test (accel/decel ) test and ,live...
