Separate names with a comma.
Like I said, the wrench must be moving when the wrench clicks. If the wrench does not click before you stop, the correct torque has not been...
I was about to give up on my proposed method of installing the Cusco strut tower bar and would have to "bite the bullet" and remove all of those...
In 1977, I purchased a Camaro with a 305 CID 5 liter engine. I religiously used the stuff that was popular then in Popular Mechanics called...
Here are just a few discussions; Tanabe or CUSCO Strut Tower Bar — Is it worth it? | Page 2 | PriusChat Latest and lightest Gen III...
M6x1.0
I'm NOT one to be sold on oil additives and supplements, but I believe that molybdenum disulfide of MoS2 can really help "start-stop" engines like...
I use Liqui Moly oil additive. [media] MoS2 or molybdenum disulfide is known to be a superior lubricant, even when there is no oil pressure....
You have "Les" in your user name. Ade Pohlenland.
Ete vous Francais? Je ne sais pas!
I have two of them; one black and one silver colored. They are one piece; not welded from parts.
Maybe he's German and meant "hoch."
Getting it 'straight" is pretty easy with a tap and handle and tough with a short 3/4 inch self tapping plug.
This is NOT how I do business. The tap and 1/2 inch drill bit does not cost that much. M14x1.5 oil drain plugs cost less than the self tapping...
An "oversized" self tapping plug with an industry standard called a "type F" thread might be OK for the occasional user, but will not last under...
My state does NOT require a front license plate. If it does, I'd make a holder that screws into the "tow hook" socket. Or, I'd use 3M VHT...
The bracket is attached through the bumper with M6 hex 10mm sheet metal very coarse thread sheet metal screws 12mm in length. The aluminum...
It is well known for hundreds of years that bolts fail before the tap threaded holes and nuts. They will snap first. This has to do with tensile...
They are WRONG. They don't understand how these parts are manufactured.
Actually, the welded on NUT on the pan is annealed in the welding on process, which makes it softer, not harder than the bolt or plug. The NUT...
If I was the mechanic "rethreading" the drain hole, I would and can actually feel how good and strong the resulting threads might be. A CNC...
