Separate names with a comma.
You need an 8mm e-torx wrench or socket to remove the M8x1.25 studs. They are used on BMW's. Here is the best deal on a set, although you only...
It's apparent that it's the underhood heat and sound insulation dragged off the retainig clips and down onto the engine. Post a photo of the area...
To make a valid comparison, we must consider cars of the same age, mileage and equivalent service history. Sure, the 2010 Prius will not have a...
Good until June 23....
Just got this fuel transfer pump selling for $75 on Amazon for $39.99 plus tax at Autozone. [MEDIA] TERAPUMP 4th Gen Gas Can Fuel Transfer Pump...
You can always go to the auto parts store to get a "U" shape heater bypass hose like this one. [MEDIA]
Whatever you do, you still need to keep the exhaust heat exchanger valve connected. Otherwise, you will get a check engine light and a trouble...
No need to do anything. Dust might get into the seals of the strut more easily, but it is not necessary to replace the boot unless the strut is...
Gotta love you, dogman.
Doggie. My Gen 3 was absolutely easy to fill with the UView.
Worked on a Gen 3, which has the thermos and a nore complicated procedure. [MEDIA]
I used the UView vacuum coolant filler. Took 15 minutes and no need for the fidgety maintenamce mode. Since I got mine, Harbor Freight has come...
Might be, but I prefer the simplicity of a beam axle as really cheap to repair. All those rubber bushings will drgeade with age. Any damage to...
The NTSB is loaded with reports of aircraft failures that happened on account of over torqued and reused bolts that have resulted in catastrophic...
The first thing I ever learned in Materials Science 101 is that a structures fail with the degradation of the first molecular layer. All head...
My time and work is more important than the cost of new head bolts. In the aircraft industry, in many places, it is a certification fail. May...
Only real issue with high ouput LED's is the heat. Unless properly cooled, they burn out quickly. I've used these for the past three years, amd...
I would check and probably replace the upstream oxygen sensor, since the system compares the downstream sensor that you replaced to determine the...
PVC (polyvinyl chloride) pipe fittings are not suitable for domestic hot water and will likely melt or become soft whem exposed to ubderhood...
Eric of South Main Auto is not working on a Prius, but the technique he used to find the phantom drain might be helpful to the OP. [MEDIA]
