Separate names with a comma.
This video shows what comes out of the oil pan with a failed head gasket. [MEDIA]
Nothing. It would be easier not scraping off the silicone, if the oil pan and pickup needs to be cleaned especially after a head gasket change....
I a long running thread posted by wr69, he noted how about 8 ounces of oil is never drained though the oil pan drain hole. If there is debris...
RTV applied by a robot is a lot cheaper than positioning a gasket, placing bolts and torquing them in. Replacement of the oil pan has totally...
For those who have done a head gasket repair, it would be a good idea to remove the pan and clean out the residue from any head gasket sealant or...
Easy, Coat the tap with grease to capture the cuttings. Use a magnet to catch any loose steel pieces. Run a half quart of strained old oil...
Sure, I would like to have that pan and have my dad's friend experiment with it. I have the M13x1.25 kit from Amazon and would rethread it and...
I agree with Mendel that the Honda wrench socket is the strongest tool, as it is the one that Honda dealer technicians use. I have the Toyota...
Here's one guy with a comprehensive YouTube video showing his install of the Autosaver88 cat. [MEDIA]
Haven't driven 100k miles. I drive mainly in town. My shield has been in place for nearly two years. I've continuously monitored both engine...
Het tovarish, comrade.
They are closing down in Russia.
Overfilling would really cause damage.
If it was my car, I keep one of these Dorman rubber plugs in reserve in my car, so that I can or the shop changing the oil can fill the crankcase...
Only problem with the Lisle kit, it makes 5/8 inch threads hat are equivalent to 15mm. There is not enough "meat" on the thin walls of the...
Yes, it will work for the Gen 4....
Here's a really inexpensive option. Due to the really expensive cost of the dies to stamp these pans, they are most likely made by the same...
This is the one that you'd be referencing. Best Q M13 x 1.25MM Oil Drain Plug Tap Thread Repair Kit Oil Pan Screws Rethread Tool [MEDIA]
If I was going to install a new oil pan, I ditch the silicone and install it with a real gasket which is less messy and cost about the same....
Another option would be to remove the oil pan, grind off the three spot welds securing the three very small 1/16 inch spot welds that hold the...
