Separate names with a comma.
How did the previous engine of your Prius C died?
They are not sadly, they are good protected against rain, dirt mud and more, but against solid objects like rocks and metal is very vulnerable. I...
Brake lines did not suffer any damage? i got today into a quite hollow speed bump and scratched the undercarriage, was worried about the brake...
Hissing sound, mine had that too, and it ended up being the brake booster assembly, though you will need to scan it and read the codes. This is an...
I tightened the brake lines good enough, everything is back to its place, turned the car on and the lines are pressurized again, is not leaking....
Well then, i will see if i can bring my Prius C tomorrow to them to bleed the system after i have installed the brake booster assembly, i'm just...
Yeah is $150 for bleeding the system completely, i find it quite expensive but i guess is better to pay that than to take the risk of buying...
I called today at an authorized Toyota dealer, i asked them how much it would cost to bleed the Prius C brakes and they said that i was about $150...
The metal bellows could fail for sure, but i'm not sure if there are any kind of valves in the brake pump assembly, you don't see the solenoid...
Here are some pictures i took today after removing the Brake Booster Assembly from my 2012 Toyota Prius C. Sadly this unit failed by having an...
Why would they even put that sensor that goes to the combination meter? seems like it serves no real purpose on letting you know that something is...
Do you have any experience in tightening brake lines by hand with no torque wrench? if so, anything negative that you had ever experienced?
I will see if i can get these crowfoot flare wrenches then. I don't think is strictly necessary to torque the brake lines to a specific value,...
Is there any tool to torque brake lines to a specific value?
That's a relief, it's good that Toyota with Kaizen keeps improving their machines more and more, and since i got the Prius C i don't expect almost...
That's good to know, i ask because when i went to buy my used 2012 Prius C, when i asked the dealer guy that if we could go for a drive test to...
So even if i floor a Prius [in this case 2012 Prius C] accelerator all the way down, there is no risk of damaging the HSD because the Prius does...
I know this is old, but if you forgot to put coolant in the inverter reservoir, the inverter probably overheated and got damaged.
I think is 20 foot pounds for the 2 top bolts, and 15 foot pounds for the 3 bottom bolts. Can please someone confirm if is the same for the Prius C?
I see, maybe if you have the time, or you are able to, you could take a look at the C and V repair manual and see what is says about such thing, i...
