Separate names with a comma.
Depending on what you think "IMPORTANT" is. From the point of view of Prius operation, the voltage differences among the blocks of the battery...
My car reported a P0A80 about 2 weeks ago. I parked the car in garage for a day, then measured the voltage. The strongest block showed 15.68V, and...
It looks like one of the parameters used to trigger a P0A80 is the Delta SOC. But how does the computer know the SOC of each block? As I see it,...
Another question: do you need to turn on the traction battery fan during discharge, assume the light bulbs are located away from the battery and...
@Abarnabe Care to elaborate what's not right in @A.J's statement?
Do you use a Mean Well LED driver for Prius C? If so, which model?
Definitely I'd like to leave the battery in the car for the reconditioning. I have the impression that pausing in NiMH battery reconditioning is...
Somewhat confused with the data displayed on your discharger. At 169V and 0.285A, the effective resistance is 593 ohms. Assume you use 360W light...
Did you mean the whole pack was discharged to such low a voltage? What discharger did you use? How hard is it to manage the discharging without...
Have you ever plug / unplug the connector (to the battery discharge cable) with both light bulbs installed?
Makes sense, but the discharge current is only 1.7A though.
The Prolong website has the following discharge instruction Light Bulb Discharger User Guide – Hybrid Automotive: "When using the light...
Thank you very much @Brian1954. After receiving all the parts (it will take 2 weeks+), I will start to build the grid charger / discharger, and do...
Thank you @CatNinja. The thread you referenced has a lot of great information. I did order some resistors a couple of days ago, but I picked up...
@CatNinja Thank you very much for the timely information. I have a 500+ miles trip coming in about 2 weeks. I was planning to drive my Prius for...
@Brian1954 While waiting for the parts to arrive for the grid charger build, I searched Delta SOC on PriusChat, and found your posts...
Thank you @Brian1954 for your analysis and advice. I plan to DIY a grid charger, and will let you know the result after completion.
Here is the screenshot I just took. [ATTACH]
Thanks. Then what could be the cause of the P0A80? After clearing the code yesterday, the car passed Dr. Prius' "Full Battery Test". But the...
A couple of days ago my 2012 Prius triggered the P0A80 code. I think it is time for me to build a grid charger by utilizing tetech's design as...
