Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
So I think head gasket repair is a little bit beyond my capabilities. From what I've seen on videos of people doing it, I'd be likely to never get...
So whats the remedy there? Should I just bite the bullet and drop a new engine in her?
I did that, soaked it for a half hour. Running water hose on it, it flows right through. I think the problem is the flow in to the heater core. I...
So my head gasked started getting a little dodgy last week so I used some bar's leaks head gasket repair. I previously used it 40,000 miles ago. I...
I actually already tried that, then did a flush with some of the high-quality Blue Devil product w/ degreaser. No potatoes.
OK, so I changed out the hose with a tear in it, and a couple others. Refilled the coolant per the manual to 'B' and burped hoses etc. It seemed...
Well fellas I think I found the culprit. I noticed some coolant down by the throttle body that just seemed out of place. Then by slightly...
Tried using the manual, filled to B. Squeezed all the hoses, then ran it in maintenance mode and squeezed them some more. Took it for a spin last...
Ahh I see. Thanks for the response. Where can I get a manual? What's the best manual?
So just to be clear, once coolant was coming out of the air bleed valve you closed it then squeezed/burped the hoses while they were cold and with...
So I recently cleaned the intake manifold and spilled some coolant which gave the car air bubbles triggering a hot coolant light flashing at high...
Yes I have been choosing the option that says ABS Actuator Replaced instead of the Normal Air Bleed option. Do you think I should find something...
That is exactly when mine is cutting out, during the refills and I haven't made it past about number 5 yet. Thanks for the info on getting a more...
Ok problem solved. I went out and stared at it a while and realized the red brake line going into the actuator is supposed to be the 2nd from the...
Good info thanks borgestes and ChapmanF. I am in rural East Texas btw, about halfway between Dallas and Houston. Before swapping out the actuator...
Sure thing. This is my old actuator. [IMG] This is what I suspect is the "stroke simulator" nipple that I can't get anything to come out of...
So I bought an actuator off ebay and replaced the old one. I bought a mini-vci xhorse and techstream as well. When I turn on techstream it is...
So after seeing that someone remedied the problem by adding some brake fluid I did. The results have been that the abs/traction/brake lights are...
Will definitely look into that here in a bit thank you. After driving it briefly for lunch I took a look at the level and it was slightly above...
Ok I got the codes Chassis: C1391 Electrical: B1273, B278C Network Systems: U0100, U0155, U0293
