Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Yes, it's a 2010. The new cells are 1V higher than the weaker ones at the worst case. That is when I floor it, the weaker cells have a higher...
Hi Brian! Have you installed new batteries with old batteries? Does it work?
Hi ASRDogman! Have you mixed new cells with old ones? Does it work?
Hey everyone, I'm having bad experience replacing batteries on a 2010 prius. See voltages for blocks 1 through 10. I replaced cells 11 through...
350k ish and just put a 130k engine on it. 2nd hybrid battery. New exhaust. That’s nothing. I just saw a 2011 Prius c with 400k. [ATTACH]
never heard a more beautiful sound!
2/12/22 Update You made me doubt what I remembered so I went to test the cylinder compression pressure again. I got 125 psi and some change for...
I know engine well. I owned the car the engine came from. No issues with the engine prior to me putting it in this new vehicle. I performed...
TDC, I am guessing, would be right at the left edge of cylinder #1 spark (green trace). I certainly ran out of options at this point of what to...
Ok as promised here's the data I took Here's the bad engine - the one that doesn't start. [ATTACH] here's a capture of the known good engine...
what data would you like to see beside the computer data i've already shared above.
2/3/22 diagnosis - I did perform the fuel pressure test during startup. Fuel pressure stays at 50psi. - Here are the captures I took today from...
1/31 diagnosis: Additional diagnosis performed: - checked fuel pressure again - 50 psi - checked air suction at throttle body - good hand suction...
I've attached the autel data for reference.
Is there a signal that I can capture with a scope that will show TDC reference?
I didnt change the coils. I can easily try that. I did clean the throttle body and fly wheel. when I put in starter fluid I get a rough engine.
fuel pressure is 50 psi when the vehicle tries to start.
