Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Yes, I was suprised hearing music. Because with my experience, an amplifier not behaving ordinary is broken. But, after having reading several...
Update again. I plugged in the amplifier again while measuring the current from the battery. As I plugged the amplifier in the current increased...
Ok, thanks. I will try that tomorrow //Swede70
No, its not an aftermarket, its the original
Another update. I disconnected the amplifier under the seat and connected the ”AMP” fuse. Resulting in 0,022A after locked doors. Must be the...
Update This morning I had a voltage of 12,08V and a current of 1,27A, with all fuses in, all doors closed and locked, FOB away. Then I pulled the...
Many big hugs and thanks for your concern! Ok, I spend some time inside the car today, recording measurements from two multimeters, one measuring...
Sorry if you are sighing, that was not the intetion. I think I am quite educated, but of course I have a lack of experiece of hybrid car...
I am listening! Ok, tomorrow I will give it another attempt. With the FOB far from the car. I can measure the current while the trunk is closed...
Well, maybee I didnt wait 30min. But to have 1,7A current initially then a decrease to 78mA just by disconnect the fuses seems like a serious...
thanks for your answers. I charged the battery for 48 hours, and measured the current. With the car shut downed I measured approximately 1,7A....
have a Prius 2004 that has problems again. This time it's the 12V battery. The car is rarely driven so the battery usually discharges a bit....
Many thanks Paul! The paper clip method was sucessful
Its suspicious to me too. But I have a thought . That if a battery module is internally short circuitated (perhaps my faulty module 2 and/or 3?)...
Yesterday I bought an used ECU. Luckily I got it already today!! With no hope I connected this and pushed the start button... I have earlier...
[ATTACH] Hmm. Done all that several times.. But that block number 1 is closest to battery module? In another thread I’ve read the opposite? Se my...
Ok, here we go again.. Since I suspected that block 2 and 3 were faulty I replaced them with modules bought from EBay. I also cleaned all...
When I started this investigation a couple weeks ago I load tested (20W light bulb) each module. I saw then that block 1 ( module 1 and 2) had...
I have a last chance I think.. I thought I cleaned the busbar for block 3 and 4. But I was wrong. I cleaned block 11 and 12 instead, by mistake....
[ATTACH] [ATTACH] Ok, I have now bought an OBD2 scanner and connected it to my iphone. It showed that there were some strange from block 3 when I...
