Separate names with a comma.
Thanks, guys. Turns out the car didn't have the battery in it. Couldn't tell from the pics and they include HV batteries in their standard price...
Is there any way to confirm whether an HV battery is good in a no-start Gen1? A G1 has shown up in the local pick-u-part. It doesn't appear to...
Kinda related - these cars allow sooooo many leaves to enter. In the front, they fill up the wiper area and down by the hinges into the lower...
I've never gotten Dr. Prius to work with my G1s. I assumed it didn't because of our old com protocol. All it does is show the demo app and, I...
My buyer reversed the polarity while jumping and blew the fusible link inside the engine compartment fuse box. I've replace that fuse several...
Perfect, thank you, sir. That post describes jumping pins 4 and 13 almost like they are universal, i.e. display all the codes for all the ECUs....
Anyone know if there's a pin to jump in the OBDII connector that will make lights flash on the dash to reveal seat belt codes? The airbag light...
Wouldn't that mean that WS did write those plays? Now I'm wondering if I read those plays or if it was another Ron Lewis. I don't remember much...
I pull all the interior out of these cars when I buy one, clean it down to the metal, and scrub the carpets real good. Cleaned up many Gen1s...
Well, that was a new on me. Tire "conicity." I inspected the brakes and the bearings and front end parts and didn't see any problems. Tires all...
Amazing how that works. Got it all back together.
Well, that was stupid. I knew it would be. Yes, I'll be jacking up the other side now.
the stabilizer bar link doesn't line up with the hole on the new strut, a couple of inches apart. How do I lower the link? I bolted the strut in...
and there's a slight ticking sound when the brakes are applied over the last few mph. No ticking if I just coast to a stop, or if I use the...
I hear you Tombuk, I still got 12 G1s, trying to get rid of them. Too old to keep working on cars. This is one I sold to a friend a couple of...
Yeah, talked to the shop - a friend of mine I trust - and he says it's the compressor and not the pulley. Says I should order the compressor,...
Thanks. I can't see it, he has it at a shop. Assuming it's the pressure plate, does he need to replace all the other parts - condenser, evap...
A buddy's Gen1 had the AC compressor lock up. What parts should be replaced? I know it needs a compressor. Probably the desiccant bag? Should I...
I bailed from this after giving my advice, which was essentially the same advice you've received multiple times now. I would add that there are...
Again, I'd warn you that you'll probably break the dash bezel trying to get to that display, and there are no replacements to be had. I've...
