Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Hiya Chap, Unfortunately, I don't have a login to TIS, I have access to ProDemand and find that to usually be sufficient to track things down,...
Hi everyone! I am trying to find a place to tap the stop light signals, and it appears all the stop light inputs/outputs run through these 2...
Just a quick photo of the other end of my tap:
Hey Chap, you got it exactly right. Found CAN1 and CAN4 routed to the battery ECU, CAN1 is the same bus that appears on the DLC port. For future...
That's true. It seems pretty solid, I'll probably open it up again in a few months to check on it.
Found a leftover piece of NM 14/2 cable so I decided to use that. I started by running the cable from the rear to the front for now, tomorrow I'll...
That's a great idea. I'll probably end up getting an extra switch just in case I ruin the first one experimenting! On my lunch today I pulled...
Hi Chap! Thanks a million for the detailed information. I'll definitely be getting my hands on some similar fuse holders, those look very clean...
Hi RobH, That's where I've been connecting for testing using an OBD2 Y cable. Looking for a more permanent location, ideally would be near the...
Hey Chap! Thanks for showing your setup. Can I ask for some more details re: where you got that nice switch and how you wired it?
I have made a PCB with a STM32 processor and a CAN transceiver that I want to use to control additional lighting based on the individual door...
Hi guys, I want to run an extension cord from the inverter I have mounted in the 'hidden compartment' in the very rear of the car to the centre...
Don't know if you're still looking for this info, but here it is for a 2014: 1 - GROUND 2 - MICROPHONE -> SNS2 3 - MICROPHONE -> MCO- 4 -...
Got it! It was sharing the same message as the parking brake, which I had already filtered out and is why I couldn't find it... For future...
@RobH: The wiring diagram shows that there are inputs for the following "courtesy switches": - Front Left - Front Right - Rear (both in...
Hi @taxibuddy - unfortunately, the two rear doors appear to be connected in a "logical-AND" configuration - if either is unlocked, the status bits...
For the curious, here's how to decode the door lock and window status: def windowStatus(data, window): status = (data >> (2 * window)) &...
Hi all, I am currently working on a project for my Prius and I need to be able to know the door and window status over CAN. I have found the...
I can confirm that these codes still work on a 2014 Plug-In Prius: (the code is written for Python-CAN) lockAllDoors =...
12V battery seems good, had it tested at the local Orielly's store and they said it was fine. Extra key fob is in my apartment a good 200 feet...
