Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
But now is the middle of summer and each day is going hotter and hotter. I'm afraid of getting burnt MGs
Sorry for confusion, hybrid battery is another story and in a few days i think i will check it. Now my main concern is about MG1 and MG2 after a...
How battery fan may affect on mg1 mg2? Regarding the cooling system - yes, I cleaned it a couple of days ago, it was full of flakes. Now , after...
Guys, today is really hot outside 40C and after trip of 55 kms the mg1 and mg2 heated up to 95C. No fails appeared and the whole trip was under...
Yes, thanks, but is there any way to avoid the overheating?
2,5 years ago (32000 miles) Should be not bad even for red LLC
It's a couple of days without any failures. Seems like the problem is solved. I tried to change the coolant in inverter contour. Drained coolant...
@chapman Just started my car with the techstream and yes, now inverter cooling pump has less rpm than with failure. also "coolant heating-last...
[ATTACH] [ATTACH] Okay lets go with the inverter pump. Today I got the failure again and same time the pump was working. Rpm was 4000 Also...
So the topic should be called "both pumps are dying"?)))
Hi everyone. Today during the long trip I have noticed that after releasing the gas pedal the engine rpm goes up and only then down. It intended...
Hi everyone. After the winter got an issue, while driving when the air is blowing to windshield a loud A/C sound appears, especially while...
1 - When the HU is off all amps are off as well, as they are all related to remote coming from HU. Sometimes I drive with HU off but woltage drops...
greetings to all. The car is Prius C 2014. There is a constant drawdown of voltage - 12.4-12.8V on the voltmeter. The battery was changed a year...
gents, I've installed aftermarket radio Alpine ute92bt and it has additional three wires for steering control. 1st wire is REMO1 2nd wire is...
my button's scheme differs from yours. therefore I'm trying to install as it is. wires coming from the button are RED-BLUE-RED-BLACK As i...
seems like you used harness included into the kit, avoiding factory wires. but I want to add the button to the factory harness.
any way to avoid modification of the button?
no, I'm not going to replace the turn signal stalk. Just turn it on and off with additional button(included in kit) after the зфклштп lights (or...
kit includes button and I want to get the precise explanation how to implement this button.
