Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Thanks for the info.
I didn't mean ignored as in nobody looks at the post. I meant, when they look at the post it shows the header of the post, so people see it and...
I agree, which is why I'm just asking the one question. Is maintenance mode helpful during a crank no start condition, or is it pointless to use...
No the EGR cleaning and cylinder misfires were a while ago. I had to change the head gasket. After I changed the head gasket, it worked perfectly...
My prius can go into READY mode, but when it tries to turn on the ICE, I get a crank no start condition. I have no error codes popping up on my...
ASRDogman, Wouldn't all of those give me a code? I've had codes before for MAF and MAP sensors as well as cylinder misfires if the fuel injectors...
Brief summary, I think something is wrong with the ICE, because I can go into READY mode, but when it tries to start the ICE, it will spin for a...
I have a separate thread going about my current fix, I just felt that this might be enough of a different question that it was worth posting by...
It goes into ready mode. I can even put it into drive or reverse and start driving. But when the traction battery gets low enough to turn on the...
I'm not a car expert, but I do most of my own repairs. I feel like I am being hindered with a current repair due to not fully understanding how a...
After another round of battery charging try to start it up again to pull codes, it attempts to spin up just like before to start the ICE, but the...
I cleaned the EGR a while back, I've replaced the head gasket, spark plugs, coils, and a lot of other small work over the last 2 years. I was...
I wasn't looking at the very top when I clicked on the snowflake. I thought it was just telling me all the monitor specs. The code is P3000-388...
I received my knockoff techstream and have it installed on a laptop. With that being said, I got no new information from it. It still pulled a...
Upon further troubleshooting, trying to confirm my crankshaft was actually spinning, which I should've done before changing my crankshaft sensor...
It looks like I will have to get a knockoff techstream so I can read the subcodes. With that being said, I feel like I am missing something that...
It's been a while since the last update on this, but I was dealing with getting the traction battery charged up enough to even attempt to start...
Thanks for the help guys. I ended up just letting them cool more, while trying to lightly tighten it down a bit at a time, and each time I went to...
Well I've watched several videos on balancing and they all say to balance it once they are charged up, which is what I did. Whether that is right...
Ok so to clarify, while charging, they were fully tightened in the rack. I hadn't loosened anything at that point. I removed them so that I could...
