Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
9c, 48F, it doesn't drops when starting the engine. 102.3Kpa pressure
ignition on only 13.49 PSI, throttle at ~18% open.
i will check it again without going in ready mode, just ignition ON only, TB is clean just like a new i don't think this is stuck open, should...
can u recommend any android software to test intake manifold pressure?? maybe my scanner software reading wrong.
its just says "intake manifold absolute pressure" on idle it shows 13-14 psi, when i floor accelerator then it goes to 3-4PSI at 2500rpm thats max...
if i dont disconnect coolant lines, how should i remove intake manifold assembly to completely clean it?? i think i have air leak.
spark plugs is like a new, i have changed it 2-3 month ago, i have to swap ignition coils from cylinder 1 to cylinder 4, If it gave me an error on...
141K miles on it, yes i did pulled throttle body coolant hoses.
i live in Georgia (country in europe) very well known guy tuned my car, he knowns his job.
3-4 PSI on full load, 13-13.5 idle. thats what obd shows.
i cleaned it like a new, small build up still left on only EGR holes but nothing serious, all the hoses and connectors is checked no issues, car...
can oily MAP cause engine to stay ON and increase RPM while running with ICE and breaking on speed bumps? im going to clean it with CRC MAF...
i just cleaned intake and throttle body just like a new 0% carbon or oil build up, replaced PCV and intake manifold gasket, after all this car...
can i clean it with MAF cleaner?
At first I thought it was too overcharged, but electric fans keeps turning on and off, this is a sign of an electrical short, it lasted all...
Hello, my 2011 gen 3 a/c condenser leaked fluid, can i unplug black connector from a/c condenser and keep driving it before i change a/c? This...
Thanks, i couldn't find that exact bulbs on amazon :((
Thanks for feedback! i found the problem, my low beam wire harness is corroded and burned, that's the issue why my low beam keeps burning out.
Hi there, Which is the best aftermarket sway bar links and front brake rotors for me 2011 Prius Three? Also which is the best aftermarket brake...
Hello, i have 2011 Prius three, I changed the low beam bulbs 5 times in 2 weeks and still burns, I saw on the forum that there is high voltage in...