Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
So yesterday my odometer stuck at 299 999. As you can see at my previous post I’ve bought a complete odometer from 2007 lift. This is EU version...
As you can see there is no TPMS light, and this is facelift becouse ,,Ready” is on the right side.
Hello. I have 2005 Prius Europe and my odometer stuck. I bought odometer from 2007 - after lifting, it has ,,ready” icon etc but don’t have TPMS...
The problem was very stupid. Those beeps was from my gas installation - remember beeps to change filters :D and the error code from immobiliser...
And i cant erase that code - it’s always on
Yes I know :) the car transponder is ok i think becouse one key work, another key dont work so i think the key is problem - but keyless work with...
Hello I have keyless system and two keys. Always when I turn on IG the car make 3 beeps 3 times - so 9 beeps. keyless works at 2 keys without...
Mine also same so the repair is fully successful. Thanks ;)
My English is not perfect. So you said it is pretty normal ?
I have drive with that used pump for 10 days and I have a question. This pump is quieter than old broke. My question is how often pump is...
Brake Assu replaced for used one and for now everything works fine. No lights, Linear Valve Offset went fine first time. Old brake assy have...
At post 49 I show photo - it is 2009 assembly with harness. Can I disassembly old and just put in this whole part or I need to just replace odo...
I posted photo. I just need to remove entire and just put those cluster or I have to change odometer and lights ?
I think ECU make a Relays working just fine. I’ve checked it via active test tab and also monitor what ECU made when driving - ECU turns on relay...
Hello. My odometer stuck. Ive got full assembler from 2009 Prius - it is plug and play (after delete tpms light) or the harness is different?
I have a question - can’t I just jump pin 3 relay 1 with pin 3 relay 2? The pump will run more noisy becouse no resistor but it will destroy...
Ive got used part and BM1-BM2 is 1,4Ohm, BMs to Ground are ok, but BM1 and 2 to MTT is about 500ohm, and the diagram said it should be 10Ohm but I...
Yes. I will confirm it 28 September with my mechanic - I will remove windwiper to have a access to brake acculator socket and then make...
I’ve maybe mistake pink-green colours becouse there is so tiny space and I barely see what I measure. At one Relay and one pin was 0,00 and at...
I think diagram is good resistor have 2 black wires with a socket and those socket are green a pink like on a schema. At 28 september im...
