Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Unfortunately, I don't have techstream.
I don’t believe the engine will turn over without the ignition coils. Have you tried this method? I never heard of anyone successfully checking...
How do I get fuel trim numbers? I don’t have anything I can hook up to the ECU. As for the knock retard, I can’t be sure but I don’t believe so....
I had the same exact problem with my 13 Prius that had 132k miles, except I was losing coolant in very small amounts. I did not see any sludge in...
EGR and intake has been cleaned. I did the head gasket with OEM parts. The coolant was leaking into the #1 cylinder and washing the piston. The #1...
Attached is a picture of my #3 and #4 cylinder spark plugs. The worse one is the #4. Back story is that I replaced a head gasket 10,000 miles...
Yes the timing chain had skipped a tooth. No more issues now for the last 3000 miles.
I turned the engine in reverse just a hair to release the tensioner. I have yet to take the valve cover off and harmonic balancer to verify...
Ok, so the 2 ground wires on the valve cover were loose. Motor seems to run fine now except for the P0016 code that keeps coming up at startup....
Yup, same issue here with my 2013 with 134000 miles. Ended up being the head gasket.
Well the used ECM didn't work. I get the check hybrid system warning and 6 codes. P0031, P0351, P0352, P0353, P0354, and P3147. If no one has...
I was reading one of the above posts by Mr. Guy Man I and he mentions the correct gap for the crank position sensor. I’m wondering if I put too...
I purchased one off eBay and it’s on its way. I agree that is a lot of codes. I made sure all the plugs clicked when I connected them. It’s...
Sorry to jump your post. I think my ECM is bad and I'm thinking of trying one off of Ebay since they are so cheap. I just want to clarify that I...
I didn't put the 2 zeros for each consecutive ignition coil misfires. I put it in maintenance mode and after running for 30 seconds, motor died....
After changing my head gasket using the video on gasketmasters, I am getting multiple codes. First one was the camshaft sensor and crank position...
