Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Which month is this vehicle produced? [IMG] Br, Peter
Thanks. I was actually beeing a little fussy. Let me clarify: Both the gen 2 and gen 3 has a fail safe mode where the ICE is disabled and which...
This is wrong. The Gen3 also have an OutOfGas (Forced EV) mode, and it works basically as with Gen 2. Blended mode also works fine. You cannot use...
If you look at lbs per hp, a PHEV Prius in Forced EV mode has about 2900 lb / 25 kW = 116 lb/kW. A Light quadricycles (Motorised quadricycle -...
I disagree. Here's why: This is only a problem if you are driving in a "Forced EV" mode. There are plenty of other options as well. You can use...
I've checked out several online stores for buying spare Toyota parts, but none of them has, for example, the 90980-12A13 connector housing. I can...
It wonder if the policy for Calibration Updates (ECU Flash Reprogramming) is different for different markets. For example, I've noticed that if...
It is true that there are relatively many Chademo stations and vehicles out there, if you look at the current market. However, if you have a...
I have both a gen 2 and gen 3 Prius, with built in navigation. With the gen 2 one, I can update the maps simply by ordering a new DVD from TOYOTA...
Thanks. Yes, I eventually found it. Took a Techstream subscription, and then found documentation about this.
Anyone knows where the junction connector A52/A53 is located? Can't find it in the repair manual. In general, I think the gen 3 repair manual is...
I've used both the Drew Tech Mongoose MFC as well as the cheaper Mangoose cable for occasional health checks etc. Has worked fine. Recently,...
I'm somewhat puzzled by this Xgauge. I want to display kW instead of amps. Scaling with 0.22 (ie assume 220 V) is good enough for me. However,...
Thanks! Using the contactor signal CON2 worked fine. The green wire was quite easy to access. Btw, I think this is poor design by Toyota. The...
I need a +12V signal that is only active when the DC-DC converter is active. This is to avoid running a few things when only running on the small...
My problem is the opposite: The PTCs are turned off way too early, initial tests indicates that they are turned off when the engine temp is about...
This is what the repair manual says: Heater core integrated PTC heater • Air outlet is in the FOOT, FOOT / DEF or DEF mode. • Engine...
Is this a guess, or have you actually verified this somehow? If this is true, I suppose that the SOC calculation is performed by the main ECU, and...
Good point. If the MFD uses solicited messages, we can probably pick up the answer as well. I wouldn't be surprised if it uses simplified messages...
Yes. However, the battery / hybrid information such as SOC is only available by active (solicited) requests. This might be good enough for...
