Separate names with a comma.
WE HAVE SUCCESS!! I went to my local yard picked up a replacement axle while there I did the corolla rear sway bar upgrade. installed the new axle...
Yea I tried it and failed I even put it in numbers facing in went back to the shop it was worse.
link please?
Shure could you suggest which one and what the settings should be? I tried I got it all wrong is why I came here for help using a easy shim but...
Yes I got car for 600 it was in a front end fender bender. I can get a rear dead axle at the local yard for 150 I think this is the best option....
I got car for 600 it was in a front end fender bender. I can get a rear dead axle at the local yard for 150 I think this is the best option. Would...
Hello I rebuilt the suspension on a 2005 Prius, lower control arms struts bearings the works. I took it in for an alignment and it seems I need a...
I have the right stereo 51824 disc/aux button my prius did not come with oem aux I got a blue tooth adapter to plug in to the CD changer port in...
Likely stereo replaced look at the model of stereo in the front and look it up. you can go to the junkyard and pick one up that supports it for 40...
Hello I upgraded my battery to the new cylindrical batteries but the wiring harness I got is for a gen 2 so I cut the end and connected my gen3...
ok i am convince thanks for the thorough explenation
Ok thanks. how you like the venza and is the MPG as good as they say/how is the maintenance reliability factor?
I was in a car accident and my car was hit on the wheel. My car does not pull or veer goes straight for a at least a quarter mile depending on the...
Yea I was paranoid did the same I put in 3 holes. you really just need to bleed the system like ten times never never letting get over 195 during...
same gasket as it will be obvious if it leaks. if it does and you are in a pinch clean it and use the grey gasket seal both sides should work to...
it is my experience that the air gets stuck behind the thermostat not allowing the impeller to do its job like a dry pump it will never do its job...
no, it only went in about 4 inches
no Im talking about the timing chain/engine face cover
IF you swap from gen 3 to gen 4 I advise get the engine as native as possible IE make it gen 3 as best you can replace what you can to make it...
