Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
What?
Which one should I go with. Read good things about NSK. Thanks [ATTACH][ATTACH][ATTACH][ATTACH]
Might want to check your heat shield. It might have rusted through and rattled whenever engine kicks on.
I did finally figured out what the problem was. The first time I cleaned the throttle body I was being extra careful and only spray cleaner...
You are correct, the problem is back although drivable. I feel like the throttle may be bad. It sounds like it does not open big enough for air...
Update. I think I found the problem. The air intake filter was clogged so I replaced it with a new one. Now the car drives much smoother without...
Has anyone used these plugs from RockAuto?
So the car is still hesitant and loud at acceleration but once it gets up to about 30mph it quiet down and drives normal. The only other thing...
Thank you.
I had the valve replaced by a dealer a couple years ago. I have a veepak Bluetooth OBD somewhere. I will see if I can pull any codes from it. Thanks
So I took all the spark plugs out and made sure it all tighten down correctly. Plugs 1-3 are all dirty and has carbon built up on the tips. Plug...
So the car is still hesitant but a bit better after straightening out the kink hose OCC. I am gonna take the cooler apart on the weekend and...
Yes I saw that but i don’t have tech-stream. Saw a thread that indicated unplugging the negative will reset the throttle.
I disconnected the negative from the battery and left it for 20 mins. The problem is still there.
Thanks for all the helps and ideas. I decided this morning to start taking thing apart again. I first drained some coolant and checked the seals...
I use Rock auto pvc and $30 Amazon OCC. I mounted on top but decided to move it down low when I do the cooler cleaning. connection goes like...
I cleaned the intake manifold and the 4 ports in there a couple of weeks ago. The car ran smoothly after the cleaning. There is no code. Car...
So I have my wife press on the gas pedal while I look inside the engine to try and pin point where the sound is coming from. The connection...
Thankfully it is still there
. . I hope this is not the case. Car was running fine with no problem before the cleaning.
