1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2012 Prius 4

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Epyoch, Jul 3, 2019.

  1. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    134000 miles, a week ago my Prius had an hybrid error with 4 lights but I was able to start it and get it to the dealership while at the dealership 2 the traction thing and the abs turned off.. Main battery was culprit, new battery was installed. Worked fine until this morning, got in my car and pressed the button, check hybrid 4 lights like before plus red battery and red steering wheel.

    The 4 lights are the triangle, the traction thing, abs, and engine.

    I'm at work I can provide pictures tonight.
     
    #1 Epyoch, Jul 3, 2019
  2. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I had to replace the 12v about 4 months ago.
     
    #2 Epyoch, Jul 3, 2019
  3. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    55,563
    38,724
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Was the replacement hybrid battery free? Just curious.

    Do you have anything constantly plugged into the OBD port? I've had that cause errors, using a scangauge all the time.

    Just because it's easy, I would start by checking the voltage on the 12 volt battery. Best approach would be to leave the hood popped the night before, then check it first thing in the morning with a digital multi-meter at the jump start point, before opening any doors, disturbing the car in any way. If it's reading at least 12.6 volts, I would head for the dealership next, see what codes they get.

    Check gas cap is tight too.
     
    #3 Mendel Leisk, Jul 3, 2019
    Last edited: Jul 3, 2019
  4. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    No was not free
    3426.79

    Will check tonight
     
    #4 Epyoch, Jul 3, 2019
  5. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    55,563
    38,724
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    very early for hybrid battery to fail. I'm wondering if they completely misdiagnosed with that battery swap. Did they document the codes, show you a printout?
     
    #5 Mendel Leisk, Jul 3, 2019
  6. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I didnt get to see the codes at that time and it was literally the one time I didnt have the obd2 in my car. So I never saw them, the code that showed up today is peoa6. But it seems to have cleared itself. And the car starts
     
    #6 Epyoch, Jul 3, 2019
    Mendel Leisk likes this.
  7. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I also dont have anything constantly plugged in. I just have one.
     
    #7 Epyoch, Jul 3, 2019
    Mendel Leisk likes this.
  8. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    The code on the sheet was P0A80 for when they replaced the battery
     
    #8 Epyoch, Jul 4, 2019
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,908
    49,485
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    that's the correct code. have you tested the 12v yet?
     
    #9 bisco, Jul 7, 2019
  10. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Yeah 12.8 volts at the jump place. Figured it was good. So the code I saw on my reader later that night was poae6 I cleared it and everything was fine, 2 days later I got poae7. Any ideas?
     
    #10 Epyoch, Jul 7, 2019
  11. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,908
    49,485
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    google says 'hybrid battery recharge contractor' first one is low, second is high. not sure what or where that is. a thread here was the inverter, but there were other codes as well.

    what is the history of the car?
     
    #11 bisco, Jul 8, 2019
  12. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    134000 miles oil changes every 7000 miles or so
    I am the second owner bought in 2017
    Main hybrid battery replaced with a new Toyota one about 2 weeks ago
    They did the recall update when they replaced the battery

    Original owner purchased in Arizona
    I purchased in Oregon then later that year moved to Phoenix
    It had 89000 miles on it when I bought it
    What more do you want?
    Isolated what causes the poae7 error pops up when on an inclined plane like a driveway
     
    #12 Epyoch, Jul 11, 2019
    Last edited: Jul 11, 2019
  13. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    If nose pointed down on driveway I get poae6. If tail end pointed down I get poae7
     
    #13 Epyoch, Jul 11, 2019
  14. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,908
    49,485
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    what code reader are you using?
     
    #14 bisco, Jul 11, 2019
  15. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Dr Prius and torque show the same errors, using a carista.
     
    #15 Epyoch, Jul 11, 2019
  16. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,908
    49,485
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i guess the next step is the service manual then, to figure out what is causing the different codes on the inclines
     
    #16 bisco, Jul 11, 2019
  17. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I'm taking it to the dealership tomorrow with the data I collected
     
    #17 Epyoch, Jul 11, 2019
    bisco likes this.
  18. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,908
    49,485
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    all the best!(y)
     
    #18 bisco, Jul 11, 2019
  19. Epyoch

    Epyoch Junior Member

    Joined:
    May 13, 2017
    25
    9
    0
    Location:
    Eugene, OR
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    They said a wire was loose...I am not certain I believe them, update today at the car wash, car wont start.

    PAODC is the code now
     
    #19 Epyoch, Jul 25, 2019
  20. frodoz737

    frodoz737 Top Wrench

    Joined:
    Aug 26, 2010
    4,297
    2,348
    33
    Location:
    Texas
    Vehicle:
    2015 Prius
    Model:
    Four
    Time to go see the Service Manager. Someone's not doing their job right back there. Get a free tow out of it too.
     
    #20 frodoz737, Jul 25, 2019
(You must log in or sign up to post here.)