1. Attachments are working again! Check out this thread for more details and to report any other bugs.

30 amp 12V output for installing an Oooga horn on my 1010 Prius and affect on warranty

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Taco, Mar 5, 2010.

  1. Taco

    Taco New Member

    Joined:
    Mar 5, 2010
    3
    0
    0
    Location:
    San Diego
    Vehicle:
    2010 Prius
    Model:
    IV
    I would like to install an after market horn (Oooga) on my 2010 Prius. I asked my dealer to give me a 12V output and was told they wouldn't do it. I found an accessory that will plugs into the place of one fuse and gives me that fused ling and another fuse with a 12V wire output wire. I hesitate to drill a hole on the fuse box under the hood for fear of voiding my warranty.

    Anybody (audiophiles? Fog Light Philes?) have a better way to get 12V out?
     
    #1 Taco, Mar 5, 2010
  2. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    In the fuse box under the hood, there is a 12V tap. There is also holes under the box where you can run wires up from the underside.
    See the instructions on installing foglights in the 2010.

    I can see why you would want to use that type of horn with a "1010" Prius. :D
     
    #2 spiderman, Mar 5, 2010
  3. hlkc

    hlkc New Member

    Joined:
    Feb 6, 2010
    229
    8
    0
    Location:
    US
    Vehicle:
    2010 Prius
    Model:
    IV
    lol
     
    #3 hlkc, Mar 5, 2010
  4. bedrock8x

    bedrock8x Senior Member

    Joined:
    Jul 8, 2008
    1,483
    137
    0
    Location:
    California
    Vehicle:
    Other Hybrid
    Don't worry, your warranty already expired 1000 years ago!
     
    #4 bedrock8x, Mar 5, 2010
  5. Taco

    Taco New Member

    Joined:
    Mar 5, 2010
    3
    0
    0
    Location:
    San Diego
    Vehicle:
    2010 Prius
    Model:
    IV
    Com'on I was only 1000 years off.
     
    #5 Taco, Mar 5, 2010
  6. JimN

    JimN Let the games begin!

    Joined:
    Nov 26, 2006
    7,028
    1,116
    0
    Location:
    South Jersey
    Vehicle:
    2010 Prius
    Model:
    V
    I can see why you would want to use that type of horn with a "1010" Prius. :D[/QUOTE]

    Does your 1010 need coconuts to run? Don't give Sir Robin a ride.:p
     
    #6 JimN, Mar 5, 2010
  7. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    Run away, run away... killer rabbit!
     
    #7 spiderman, Mar 5, 2010
  8. ScottG10

    ScottG10 Member

    Joined:
    Jan 11, 2010
    132
    7
    0
    Location:
    Bothell Wa.
    Vehicle:
    2010 Prius
    Model:
    III
    You don't need to drill a hole anyway. The bottom front area of the fuse box is open ~ I ran a wire for my fogs up through it. I would use one of the large open spade lugs in there to supply your horns because there's ample current available at those points. If your not sure which connections these are, check out the fog light sticky for a good pic of fuse box area.
     
    #8 ScottG10, Mar 6, 2010
(You must log in or sign up to post here.)