4th gen camerar shifted

Is it possible that the plate has been bent slightly and not tight against the car at the bottom? That would bring it out into the camera view- Car washes can pull the plate away from it's mount.

 

I got the same problem as well. As "priusman09" said, it looks like the license plate is "slightly" bent. Will probably monitor the situation and see if it get worst.

 

Mine shows part of license plate since day one. Probably you just noticed it and it was that way all the time. Our perception plays those tricks.

Nexus 10 ?

 

+1

 

IIRC, on the Gen 3, there was a camera adjustment setting on the service screen (hold INFO button and flash the headlights on and off 3 times) not sure how to access the service screen on the Gen 4.

 

I don't see my license plate in the camera view.

Maybe somebody stole it.

 

My plate visible along the lower portion of the screen. Same as day one.

 

same view as mine

 

Mine show the license plate too since day one.

Posted via the PriusChat mobile app.

 

Mine has a little of the number plate, but seems to be less than you do:

 

Nexus 10 ?

 

Haha, this happened to me today. I still have the paper dealer plate and it's peeling off so it's very visible in the camera now, but I really don't remember seeing so much of the rear of the car in the camera view. I know I don't use it much either since I'm not at all used to looking at cameras, but it still freaked me out. Good to know this happens to others and it's probably because I never really looked at the bottom of the screen.

I was also surprised by how deep the creases on the hood look, and I just washed and waxed it yesterday.