Anyway to tell how much nd11 oil left after Pulling condenser off all refrigerant blowed small line

Anyway how to tell how much nd11 oil after Pulling condenser off all refrigerant blowed out?

I didn’t realize how much a head ache and expensive this was going to be to just clean my rads out or I would of never pulled the lines.

I know I can get some hybrid no oil r134a but idk what the nd11 oil I have left. I didn’t drain the lines so it all blew out and I didn’t mean to do that just happened.


This is pretty important for my I am on a major time crunch and trying to get this back together and fixed.

 

So what you are saying is that even tho it blew all pressure all the ways down there’s a possibility I didn’t lose a lot of refrigerant or oil or both? I am just trying to understand what you meant when you say by weight not by pressures

 

That’s ok for me to hav mostly oil which is what I’m really hoping for as I know I need to pull a vac it will have to wait and I will recharge it temporarily with a hybrid no oil is my only option I see atm. I will avoid cross contamination but I appreciate the help

 

I’m gonna hook up techstream and see what it shows at least should help me see some type of numbers I won’t blow it with nothing in it of course