1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Battery motor resistor

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Wilsid, Aug 6, 2018.

Tags:
  1. Wilsid

    Wilsid Junior Member

    Joined:
    Nov 18, 2011
    91
    15
    0
    Location:
    Texas
    Vehicle:
    2004 Prius
    Model:
    II
    Pin ohms at 200k going from gnd read 46.9 next 34.8 and last 42.4 now you will
    know if it is a good resistor.
     
    #1 Wilsid, Aug 6, 2018
  2. Wilsid

    Wilsid Junior Member

    Joined:
    Nov 18, 2011
    91
    15
    0
    Location:
    Texas
    Vehicle:
    2004 Prius
    Model:
    II
    old resistor, pin next to gnd read 7.3 , fan didn't run at start up, put in new
    resistor and fan ran so it looks like I can put car back together. cost $24.00
    ebay








    4
     
    #2 Wilsid, Aug 6, 2018
    Last edited: Aug 6, 2018
    audiodave likes this.
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,405
    15,881
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I'll add to take most readings like that with a grain of salt, just because the thing is not, in fact, a resistor. It's a solid-state, pulse-modulating motor controller, and when you try to take "resistance" readings of something like that, what you get depends a lot on what your resistance meter does when hooked to something that ain't a resistor.

    -Chap
     
    #3 ChapmanF, Aug 7, 2018
(You must log in or sign up to post here.)