1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Brake Actuator replaced- Car wont start

Discussion in 'Gen 2 Prius Technical Discussion' started by jason12356, Jun 4, 2012.

  1. jason12356

    jason12356 New Member

    Joined:
    Jun 4, 2012
    1
    0
    0
    Vehicle:
    2004 Prius
    Model:
    N/A
    I just replaced the brake actuator. I had the inverter removed. After putting everything back together, the car wont start. I got these codes. c1259, c1310. any help would be appreciated.
     
    #1 jason12356, Jun 4, 2012
  2. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,472
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    When you removed the inverter, did you first remove the traction battery orange interlock plug?

    If so, when you replace the plug, you must first pivot the lever 90 degrees, then you must slide the lever to lock it in place. If you do not do that, DTC 1259 will be logged.
     
    #2 Patrick Wong, Jun 4, 2012
(You must log in or sign up to post here.)