1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Calling V8Cobra about using speakerlevel-inputs

Discussion in 'Gen 2 Prius Audio and Electronics' started by R-P, Jan 30, 2012.

  1. R-P

    R-P Active Member

    Joined:
    Dec 6, 2011
    804
    288
    0
    Location:
    Netherlands
    Vehicle:
    2009 Prius
    Model:
    II
    From this thread (which is a for sale thread that I didn't want to mess up with questions):

    Any more info on this? Are you saying the Prius amplifier will shut down if you try to siphon the signal for a speaker-input on another amp? Or am I reading it wrong (I'll hide behind English not being my first language again if I am...)?

    Just had the red warning triangle when the only thing I did was unclip the speaker-output on the headunit while it was not even turned ON, for a picture of the connector. Why would a car throw up faultcodes after unplugging some speakers??? Is this related to the above? I can hardly believe that caused the red triangle... which btw stayed there for 2 startups and over 60 miles :eek:
    The plug in question (white plug to the left with purple/green/grey wires, btw what's the dual grey wire that is not connected to anything?)
    [​IMG]
    Looking into the female-plug:
    [​IMG]
    Looking into the male-plug:
    [​IMG]
    Followingthe wires back to the headunit:
    [​IMG]
     
  2. R-P

    R-P Active Member

    Joined:
    Dec 6, 2011
    804
    288
    0
    Location:
    Netherlands
    Vehicle:
    2009 Prius
    Model:
    II
    Anyone?