1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Help Adding LED floor lighting on a switch, need a 12v source to tap into

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Marsman0013, Dec 29, 2014.

  1. Marsman0013

    Marsman0013 New Member

    Joined:
    Dec 28, 2014
    2
    0
    0
    Vehicle:
    2010 Prius
    Model:
    Three
    I want to add Blue LED floor lighting to my 2010 Prius, but cannot find a wiring diagram to tap into 12v power behind the dash. (without using the fog light or cigarette lighter sources)

    I am going to use these LED light strips


    and mod this switch into one of the blanks by the dimer


    I am hoping to do this the same time I add the Fog lights to the Prius since I will have the dash apart.
    Can anyone give me some advice? I searched but haven't seen anything that would help.
     
    #1 Marsman0013, Dec 29, 2014
  2. Marsman0013

    Marsman0013 New Member

    Joined:
    Dec 28, 2014
    2
    0
    0
    Vehicle:
    2010 Prius
    Model:
    Three
    Apologies, looks like I cannot add links.
    Lighting will be a 12" LED strip about and the switch is Close to factory size,a light up rocker switch, since I cannot find factory switches.
     
    #2 Marsman0013, Dec 29, 2014
  3. Buzzhead

    Buzzhead Non-Interference w/ devel of pre-Warp civs

    Joined:
    Aug 15, 2009
    145
    53
    0
    Location:
    Chelmsford, MA
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    You could use the hot in the driver side foot well that is used for the door will instructions.
    http://go.priuschat.com/?id=70536X1519087&site=priuschat.com&xs=1&isjs=1&url=http%3A%2F%2Fwww.juicedhybrid.com%2Fv%2Fvspfiles%2Fassets%2Fimages%2Fpt922-47100.pdf&xguid=b6b148e5a74a17d4fa922792e6b157db&xcreo=0&xed=0&sref=http%3A%2F%2Fpriuschat.com%2Fthreads%2Filluminated-door-sills-question.123449%2F%23post-1909275&pref=http%3A%2F%2Fpriuschat.com%2Fsearch%2F23057755%2F%3Fpage%3D3%26q%3Dsill%2Binstallation%26o%3Ddate&xtz=300
     
    #3 Buzzhead, Dec 29, 2014
(You must log in or sign up to post here.)