1. Attachments are working again! Check out this thread for more details and to report any other bugs.

howe to remove backseat to have a look at the HV battery ecu

Discussion in 'Gen 2 Prius Main Forum' started by Flying White Dutchman, Jun 29, 2008.

  1. Flying White Dutchman

    Flying White Dutchman Senior Member

    Joined:
    Dec 29, 2007
    4,374
    313
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    topic titel says it all..

    i dont now howe to remove the backseat ( not the lower part but the backrest part )
     
    #1 Flying White Dutchman, Jun 29, 2008
  2. richard schumacher

    richard schumacher shortbus driver

    Joined:
    Mar 27, 2004
    7,663
    1,040
    0
    Location:
    United States
    Vehicle:
    2004 Prius
    Model:
    N/A
    I don't know how either.

    Why do you want to have a look at the ECU?
     
    #2 richard schumacher, Jun 29, 2008
  3. Flying White Dutchman

    Flying White Dutchman Senior Member

    Joined:
    Dec 29, 2007
    4,374
    313
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    here it is!
     

    Attached Files:

    #3 Flying White Dutchman, Jun 29, 2008
  4. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,479
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    I am not sure that it is necessary to remove the rear seat back in order to gain access to the traction battery. If you open the hatch and take out the folding floor panel and the black plastic tray covering the spare tire, then you can see to what extent the hatch inside trim has to be removed to give you sufficient clearance.
     
    #4 Patrick Wong, Jun 29, 2008
  5. zenMachine

    zenMachine Just another Onionhead

    Joined:
    Mar 3, 2007
    3,355
    300
    0
    Location:
    Texas
    Vehicle:
    2007 Prius
    No need to remove back seat. Fold down the back rest. Unscrew a few bolts. That's it.
     
    #5 zenMachine, Jun 29, 2008
  6. Flying White Dutchman

    Flying White Dutchman Senior Member

    Joined:
    Dec 29, 2007
    4,374
    313
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    the back rest for me is part of the back seat!
    i already removed it
    and you do not need to remove the back sitting only the back rest directly behind the HV battery side where you need to acces the HV cabling and battery ecu

    in the pdf you can see where you need to take 2 bolts out.
     
    #6 Flying White Dutchman, Jun 29, 2008
(You must log in or sign up to post here.)