1. Attachments are working again! Check out this thread for more details and to report any other bugs.

  1. Flying White Dutchman

    Flying White Dutchman Senior Member

    Joined:
    Dec 29, 2007
    4,374
    313
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    i wanted to replace the inside light from the prius with a led one!

    only after removing the plastic glass the bulp flipped behind the plastic board and its gone!

    anyone now how to open the seling cover?

    picture here
    [​IMG]
     
  2. Bill Merchant

    Bill Merchant absit invidia

    Joined:
    May 3, 2005
    4,096
    81
    13
    Location:
    USA | Oregon | Portland area | 97004 |
    Vehicle:
    2007 Prius
    It looks like you lost the socket too! (pic 31)

    To get at everything, open the eyeglass holder and locate the two phillips screws near the rear sides. Take them out. (pic 30)

    There are two plastic connectors at the rear of the overhead console. Firmly pull straight down on the console and they will pop out. (pic 32)

    Now you can locate the missing socket and bulb. Be careful not to yank the wires that attach to the overhead console.

    To reassemble, reverse the procedure.

    Good luck.

    Sorry the pics are phone camera. I have LED lamps.
     

    Attached Files:

  3. Flying White Dutchman

    Flying White Dutchman Senior Member

    Joined:
    Dec 29, 2007
    4,374
    313
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    thx bill

    amazing that people now a lot of info about the prius:)

    i want to place led to! do you have a link from a site or name where you got them
    i am stil looking!
     
  4. Priusaurus110

    Priusaurus110 Junior Member

    Joined:
    May 8, 2007
    31
    3
    0
    Location:
    Monument, CO
    Vehicle:
    2005 Prius
    Model:
    II
    ITon: try this web site if you can't find the LED lights at your local auto parts store:

    Super Bright LEDs