1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Mirror Loose

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by bobzchemist, Sep 9, 2016.

  1. bobzchemist

    bobzchemist Active Member

    Joined:
    Aug 2, 2016
    507
    342
    0
    Location:
    Kennesaw, Georgia, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The homelink mirror on my 2010 Prius IV is loose - not attached firmly to the windshield. It wobbles up and down, but not side-to-side. I'm pretty sure I bought it like this. Any ideas on what to use to glue it firmly (and permanently) to the windshield?
     
    #1 bobzchemist, Sep 9, 2016
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,012
    15,614
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    There are two bits there: the part that's glued to the windshield is just a small metal plate; the mirror mount slides onto the plate, and is then secured by a little set screw, which can get loose.

    Mine wobbled when I bought it and I only needed to snug down the set screw; the glue was still fine. Are you sure that's not what you're seeing?

    Regluing the plate to the glass is a fussier job, if you have to do it, but they do sell the stuff.

    -Chap
     
    #2 ChapmanF, Sep 9, 2016
(You must log in or sign up to post here.)